Product quality and quality assessment of propellant binder by spectroscopical methods (2008)
Becker, W., Bendfeld, A., Eisenreich, N., Geißler, A., Geißler, E.
Response of energetic materials and inert substitutes under mechanical loading (2007)
Geißler, E., Blanc, A., Deimling, L., Eisenreich, N., Geißler, A.
Application of image processing for deformation analysis on energetic materials (2006)
Geißler, E., Blanc, A., Deimling, L., Eisenreich, N., Geißler, A.
Untersuchung und Analyse der Alterungsvorgänge an Polymerwerkstoffen mit MRI (2003)
Wolter, B., Kohl, F., Valeske, B., Eisenreich, N., Geißler, A., Geißler, E.
Characterization of the structure in highly filled composite materials by means of MRI (2002)
Götz, J., Eisenreich, N., Geißler, E., Geißler, A.
Modern solid propellants are highly filled composite materials. The essential ingredients of a composite propellant are a crosslinked binder, a polymer like polyurethane and an oxidizer. Furthermore,...
Mikro- und Mesomechanik hochgefüllter Treib- und Explosivstoffe (2001)
Hübner, C., Eisenreich, N., Geißler, A., Geißler, E., Gerber, P., Jedicke, O.
Integration von Mikrowellen in Kunststoffverarbeitungswerkzeuge (1997)
Ziegler, L., Emmerich, R., Märtins, R., Eyerer, P., Elsner, P., Geißler, A., ...
Qualitätssicherung bei der Anwendung von Rezyklaten (1995)
Das ICT beschäftigt sich im Rahmen seiner Arbeiten mit der Identifikation von Polymeren und mikromechanischen Fragestellungen. In diesem Zusammenhang wurden mehrere Analysenmethoden entwickelt und...
Probleme bei der Sicherung von Rezyklateigenschaften (1994)
Das ICT beschäftigt sich im Rahmen seiner Arbeiten mit der Identifikation von Polymeren und mikromechanischen Fragestellungen. In diesem Zusammenhang wurden mehrere Analysenmethoden entwickelt und...
Verschleiß durch kombinierte Scher- und Druckbeanspruchung. (1993)
Deformation in polymeric foam materials due to friction loads depend on normal force. The result of different deformations are different types of failures. In this contribution the construction and...
Dynamic behaviour of composites under preloading. (1992)
Polymerwerkstoffe mit definierten Dämpfungseigenschaften können durch Zusatzstoffe hergestellt werden. Das Schwingungsverhalten wird durch komplexe dynamische Moduli beschrieben. Diese Moduli...
Verschleißprüfung mit gesteuertem Reib- und Scherbelastungsprofil (1990)
Mechanischer Verschleiß an festen, deformierbaren Werkstoffen und Materialien wie z.B. Kunststoffen tritt häufig durch die kombinierte Einwirkung von Reib- und Scher- bzw. Schubbelastung auf. Die...
The investigations of the volume-change-behaviour under mechanical loading gives us informations about microscopical mechanisms in the material. In addition to this gives us the prestrain-dependance...
Investigations of a closed-cell foam with scanning electron microscopy (1990)
Foams belong to the most important class of packaging materials. They are part of a special group of heterogeneous materials that demonstrate nonlinear viscoelastic behaviour. When used as cushioning...
Dynamic material properties of a closed-cell polyethylene foam (1990)
With today's high standards of technology, transportation stresses can be almost completely described so that certain conclusions for the packaging container can be drawn. But an optimized,...
Dynamic material properties of a closed-cell polyethylene foam (1990)
With today's high standards of technology, transportation stresses can be almost completely described so that certain conclusions for the packaging container can be drawn. But an optimized,...
Simulation of friction and shear loads on the wear resistance of polymeric foams (1989)
Kempf-Fischer, T., Geißler, A.
Deformation in polymeric foam materials due to friction loads depends on normal force. The result of different deformations is different types of failures. In this contribution the construction and...
Numerische Simulation von mechanischen Beanspruchungsgrößen an Ladeeinheiten (1989)
Jeder Transportvorgang wird von Umwelteinflüssen begleitet. Zum Schutz gegen mechanische Umwelteinflüsse wie z.B. Schwingungen und Stöße werden empfindliche Transportgüter in Polsterstrukturen...
With todays standard of technology, transport stresses can be described nearly completely so that certain conclusions for the inlay of packing can be drawn. But an optimal, cost-saving inlay is only...
Dynamic material properties of a closed-cell polyethylene foamed plastic (1989)
With today's high standards of technology, transportation stresses can be almost completely described so that certain conclusions for the packaging container can be drawn. But an optimized,...
Zu den wichtigsten Packstoffen gehören die Schaumstoffe. Sie gehören einer speziellen Gruppe heterogener Werkstoffe an und zeigen ein nichtlinear viskoelastisches Materialverhalten. Am Beispiel des...
It is a usual method to intensify simulated environmental influences for the purpose of accelerating test. In this paper the example of mechanical load simulation is used to demonstrate how knowledge...
Ortsaufgelöste Messung der Längsdehnung an Zugproben bis zu hohen Dehngeschwindigkeiten (1987)
Eisenreich, N., Fischer, R., Geißler, A., Fabry, C., Kugler, H.P., Sinn, F.
Volume change measurements of filled polymers due to humidity changes (1986)
Weinkötz, Ch., Eisenreich, N., Geißler, A.
By measuring the volume change behaviour of a sample under tensile stress in a standard test the different miroscopical failure mechanism like debonding of the filler and cracks in the binder can be...
Tensile test of solid propellants by the use of optical techniques (1985)
Fabry, C., Eisenreich, N., Geißler, A.
Two optical methods to measure displacements in and perpendicular to the loading direction of a test sample at the uniaxial tensile test have been worked out and tested. They are of sufficient...
Fabry, C., Eisenreich, N., Geißler, A.
Aus Standardversuchen der mechanischen Prüfung konnte unter gleichzeitiger Messung der Längs- und Querverformung das Auftreten von Vakuolen erkannt werden. Besonders der Kriechversuch zeigte...