G. Maddison

Publication List Details

Period

2000 - 2009

Number

66

Co-Authors

Research Challenges for the ITER Baseline Scenario on JET (2006)

Buttery, R.J., Giroud, C., Eich, T., Eriksson, L.–G., Imbeaux, F., Hobirk,J., ...

21st IAEA Fusion Energy Conference, Chengdu, China, October 16-21, 2006

Impurity-seeded ELMy H-modes in JET, with high density and reduced heat load (2005)

Monier-Garbet, P, Andrew, P, Belo, P, Bonheure, G, Corre, Y, Crombe, K, ...

Experiments performed at JET during the past two years show that, in high triangularity H-mode plasmas with I-p = 2.5 MA, n(e)/n(Gr) approximate to 1.0, it is possible to radiate separately up to...

Impurity seeded ELMy H-modes in JET with high density and reduced heat load (2005)

Monier-Garbet, P., Andrew, Ph., Rapp, J., Belo, P., Bonheure, G., Corre, Y., ...

This version is available at the following URL: http://dx.doi.org/10.1088/0029-5515/45/11/022

ELMy H-modes in JET helium-4 plasmas (2004)

McDonald, D. C., Cordey, E., Righi, F., Ryter, F., Saibene, G., Sartori, R., ...

This version is available at the following Publisher URL: http://stacks.iop.org/0741-3335/46/519

Role of sawtooth in avoiding impurity accumulation and maintaining good confinement in JET radiative mantle discharges (2003)

Nave,M. F. F., Rapp,J., Bolzonella,T., Dux,R., Mantsinen,M. J., Budny,R., ...

Impurity injection in the JET ELMy H-mode regime has produced high-confinement, quasi-steady-state plasmas with densities close to the Greenwald density. However, at large Ar densities, a sudden loss...

Reduction of divertor heat load in JET ELMy H-modes using impurity seeding techniques (2003)

Rapp,J., Monier-Garbet,P., Andrew,P., Dumortier,P., Eich,T., Fundamenski,W., ...

One of the most severe problems for fusion reactors is the power load on the divertor target plates. In order to reduce the power load in the divertor radiation cooling by seeding of impurities is...

Parameter similarity studies in JET, ASDEX Upgrade and ALCATOR C-Mod (2003)

Suttrop,W. A., Horton,L. D., Hubbard,A. E., McDonald,D., Barnsley,R., Beurskens,M., ...

Similarity plasmas are studied in JET, ASDEX Upgrade and ALCATOR C-Mod to test the validity of dimensional constraints for core profiles and profiles at the plasma edge in H-modes with and without...

Role of sawtooth in avoiding impurity accumulation and maintaining good confinement in JET radiative mantle discharges (2003)

Nave, M. F. F., Rapp, J., Bolzonella, T., Dux, R., Mantsinen, M. J., Budny, R., ...

Impurity injection in the JET ELMy H-mode regime has produced high-confinement, quasi-steady-state plasmas with densities close to the Greenwald density. However, at large Ar densities, a sudden loss...

Reduction of divertor heat load in JET ELMy H-modes using impurity seeding techniques (2003)

Rapp, J., Monier-Garbet, P., Andrew, P., Dumortier, P., Eich, T., Fundamenski, W., ...

One of the most severe problems for fusion reactors is the power load on the divertor target plates. In order to reduce the power load in the divertor radiation cooling by seeding of impurities is...

Parameter similarity studies in JET, ASDEX Upgrade and ALCATOR C-Mod (2003)

Suttrop, W. A., Horton, L. D., Hubbard, A. E., McDonald, D., Barnsley, R., Beurskens, M., ...

Similarity plasmas are studied in JET, ASDEX Upgrade and ALCATOR C-Mod to test the validity of dimensional constraints for core profiles and profiles at the plasma edge in H-modes with and without...

Confinement properties of high density impurity seeded ELMy H- mode discharges at low and high triangularity on JET (2002)

Dumortier,P., Andrew,P., Bonheure,G., Budny,R. V., Buttery,R., Charlet,M., ...

The design value for ITER is based on operation at n/n(GW) = 0.85, beta(n) = 1.8 and H98(y, 2) = 1. These values have been routinely achieved in JET in argon seeded ELMy H-mode discharges in...

Seeding of impurities in JET H-mode discharges to mitigate the impact of ELMs (2002)

Jachmich,S., Maddison,G., Beurskens,M. N. A., Dumortier,P., Eich,T., Messiaen,A., ...

ELMy H-mode is one of the foreseen operational scenarios for ITER-FEAT. Good confinement and density is usually associated with Type I ELMs, which, however, will have a severe impact on the divertor...

Confinement properties of high density impurity seeded ELMy H- mode discharges at low and high triangularity on JET (2002)

Dumortier, P., Andrew, P., Bonheure, G., Budny, R. V., Buttery, R., Charlet, M., ...

The design value for ITER is based on operation at n/n(GW) = 0.85, beta(n) = 1.8 and H98(y, 2) = 1. These values have been routinely achieved in JET in argon seeded ELMy H-mode discharges in...

Seeding of impurities in JET H-mode discharges to mitigate the impact of ELMs (2002)

Jachmich, S., Maddison, G., Beurskens, M. N. A., Dumortier, P., Eich, T., Messiaen, A., ...

ELMy H-mode is one of the foreseen operational scenarios for ITER-FEAT. Good confinement and density is usually associated with Type I ELMs, which, however, will have a severe impact on the divertor...

Comparison of L-mode regimes with enhanced confinement by impurity seeding in JET and DIII-D (2002)

Jackson, G. L., Murakami, M., Baker, D. R., Budny, R., De Baar, M. R., Evans, T. E., ...

This version is available at the following Publisher URL: http://dx.doi.org/10.1088/0741-3335/44/9/307

Radiation pattern and impurity transport in argon seeded ELMy H-mode discharges in JET (2002)

Puiatti, M. E., Mattioli, M., Telesca, V. M., Valisa, M., Coffey, I. H., Dumortier, P., ...

This version is available at the following Publisher URL: http://dx.doi.org/10.1088/0741-3335/44/9/305

Overview of JET results in support of the ITER physics basis (2001)

Adams, J. M., Ageladarakis, P., Alper, B., Altmann, H., Arshad, S., Bainbridge, N., ...

The JET experimental campaign has focused on studies in support of the ITER physics basis. An overview of the results obtained is given for the reference ELMy H mode and advanced scenarios, which in...

JET radiative mantle experiments in ELMY H-mode (2000)

Strachan, J. D., Budney, R., Coffey, I. H., Dumortier, P., Grisolia, D., Harbour, P. J., ...

This version is available at the following Publisher URL: http://dx.doi.org/10.1088/0741-3335/42/5A/306