Nano Si3N4 composites with improved tribological properties (2009)
Schulz, I., Herrmann, M., Endler, I., Zalite, I., Speisser, B., Kreusser, J.
Nano Si(sub 3)N(sub 4) composites with tailored microstructure were developed using fine ß-Si(sub 3)N(sub 4) powders. Their wear behaviour was investigated. Whereas pure Si(sub 3)N(sub 4) composites...
Novel aluminum-rich Ti1- xAlxN coatings by LPCVD (2008)
Endler, I., Höhn, M., Herrmann, M., Pitonak, R., Ruppi, S., Schneider, M., ...
Today, Ti1 - xAlxN coatings represent a standard PVD coating for cutting tools. Fcc-Ti1 - xAlxN is a metastable homogeneous phase with excellent properties such as high hardness, high oxidation...
Novel aluminum-rich Ti(sub 1-x)Al(sub x)N coatings by LPCVD (2008)
Endler, I., Hohn, M., Herrmann, M., Pitonak, R., Ruppi, S., Schneider, M., ...
Today, Ti(sub 1-x)Al(sub x)N coatings represent a standard PVD coating for cutting tools. Fcc-Ti(sub 1-x)Al(sub x)N is a metastable homogeneous phase with excellent properties such as high hardness,...
Novel aluminum-rich Ti(ind 1 - x)Al(ind x)N coatings by LPCVD (2008)
Endler, I., Höhn, M., Herrmann, M., Pitonak, R., Ruppi, S., Schneider, M., ...
Original abstract has 13 special characters - please check & edit Today, Ti(ind 1 - x)Al(ind x)N coatings represent a standard PVD coating for cutting tools. Fcc-Ti(ind 1 - x)Al(ind x)N is a...
Development of functional ceramic films for nano- and microsystems (2007)
Schönecker, A., Gebhardt, S., Schlenkrich, F., Endler, I., Meissner, F., Michaelis, A., ...
Ceramic films gain more and more importance for the preparation of integrated functional components in planar design. The required film thickness depends on the design of the envisaged circuit or...
Hartstoffbeschichtete Koerper und Verfahren zu deren Herstellung (2007)
DE 102007000512 B3 UPAB: 20090311 NOVELTY - The hard-coated body with a multi-layer system for tools and components such as drills, millers and indexable inserts, comprises a bonding layer applied on...
Development of functional ceramic films for nano and microsystems technology (2006)
Schönecker, A., Gebhardt, S., Schlenkrich, F., Endler, I., Mayer-Uhma, T., Uhlig, S.
Ceramic films are considered as key functional material in nano and microsystems technology. IKTS has built the experimental basis for the development of functional films using screen printing, CSD,...
Leistungssteigerung von Holzbearbeitungswerkzeugen durch Gasborieren (2006)
Endler, I., Holke, R., Fuchs, I., Peter, M.
Eine aussichtsreiche Technologie zur Leistungssteigerung von Hartmetallwerkzeugen für die Holzwerkstoffbearbeitung ist das Gasborieren. Mittels Borierung können sehr harte und verschleißfeste...
Aluminium-rich Ti(1-x)Al(x)N coatings by CVD (2006)
Endler, I., Herrmann, M., Naupert, M., Pitonak, R., Ruppi, S., Schneider, M., ...
The performance of cutting tools can be increased by wear resistance coatings with improved properties. Up to now hard Ti(1-x)Al(x)N coatings with the NaCl structure have been prepared industrially...
Beschichtung von Formwerkzeugen - Chancen oder Kostenfaktor? (2005)
Zimmer, O., Schultrich, B., Stucky, T., Endler, I., Schober, R., Vetter, J.
Das Ziel des Projekts besteht in der Erhöhung der Leistungsfähigkeit von Hartmetallwerkzeugen mit kleinen Keilwinkeln für die Bearbeitung von Holz und Holzwerkstoffen. Die Erhöhung der...
High performance of hard metal tools for woodworking by gas boronizing (2005)
Fuchs, I., Endler, I., Peter, M.
The wood industry applies hard metal tools which combine good performance with high final cutting surface quality. Possibilities for increasing the performance of hard metal tools are surface...
Leistungssteigerung von Holzbearbeitungswerkzeugen durch Gasborieren (2005)
Endler, I., Holke, R., Fuchs, I., Peter, M.
In der Holzwerkstoffbearbeitung werden Hartmetallwerkzeuge aufgrund ihrer relativ hohen Leistungsfähigkeit und der erreichbaren Oberflächenqualität breit angewendet. Möglichkeiten zur weiteren...
Fatigue behavior of duplex treated TiCxN1-x - and Ti1-xAlxN - hard coating steel compounds (2002)
Jaeger, G., Endler, I., Bartsch, K., Heilmaier, M., Leonhardt, A.
The present work contains a systematic investigation of the fatigue behavior of PACVD-hard coating steel compounds. Different plasma heat treatments (plasma nitriding and carbonitriding) and hard...
Preparation and wear behaviour of woodworking tools coated with superhard layers (1999)
Endler, I., Bartsch, K., Leonhardt, A., Scheibe, H.J., Ziegele, H., Fuchs, I., ...
The wood industry has a current need for tools which combine high performance with a fine cutting finish of the wood surface. Woodworking tools coated with superhard layers like diamond, tetrahedral...
Endler, I., Wolf, E., Leonhardt, A., Beger, A., Richter, V.
Commercial cermet inserts were coated with titanium nitride by plasma-enhanced chemical vapor deposition (pecvd) using a pulsed direct current (d.c.) glow discharge. the influence of the coating...
Endler, I., Leonhardt, A., Schonherr, M., Wolf, E.
Silicon nitride coatings were deposited on hard metals at a reaction temperature between 873 and 1173 K by a plasma-enhanced chemical vapor deposition process operating with an r.f. discharge. The...
Interlayers for diamond deposition on tool materials (1996)
Endler, I., Leonhardt, A., Scheibe, H.J., Born, R.
The direct deposition of diamond on such tool materials as hard metals and steels is difficult because graphitizattion occurs and adhesion is poor. The following hard coatings have been investigated...
Cermet- Hartstoffschicht- Verbund und Verfahren zu dessen Herstellung (1996)
Endler, I., Wolf, E., Leonhardt, A., Richter, V.
The invention relates to a cermet hard material coating composite with excellent wear characteristics. During its production, no brittle intermetallic phases should occur and a diminution in strength...