Design and Calibration of a Facility for Film Cooling Research (2007)
Porter, J. S., Sargison, J. E., Henderson, A. D., Jacobs, Peter, McIntyre, Tim, Cleary, Matthew, ...
An existing open circuit wind tunnel has been modified to incorporate a secondary supply loop to provide controlled flow conditions at the inlet to a film cooling hole model. The primary or crossflow...
Using CFD to improve the design of a circulating water channel (2007)
Pullinger, M. G., Sargison, J. E., Jacobs, Peter, McIntyre, Tim, Cleary, Matthew, Buttsworth, David, ...
Computational Fluid Dynamics (CFD) has been used as a design tool to investigate means of improving flow uniformity in the working section of a circulating water channel. The CFD model was based on a...
Andrewartha, J. M., Sargison, J. E., Perkins, K. J., Jacobs, Peter, McIntyre, Tim, Cleary, Matthew, ...
Gomphonema, a freshwater diatom, is currently being studied to determine its effect on the capacity of hydroelectric canals and the structure of turbulent boundary layers. Gomphonema is the primary...
A Force Balance to Measure the Total Drag of Biofilms on Test Plates (2007)
Barton, A. F., Sargison, J. E., Brandner, P., Walker, G. J., Jacobs, Peter, McIntyre, Tim, ...
A floating force balance has been designed and integrated into the working section of a to enable the measurement of total drag on test plates, which form part of the tunnel wall. Measurements...
Henderson, A. D., Sargison, J. E., Walker, G. J., Haynes, J., Jacobs, Peter, McIntyre, Tim, ...
A numerical study of the flow through a safety butterfly valve used in a hydro-electric power scheme to stop water supply to a downstream penstock is reported. Computational fluid dynamics applied in...
Design and Calibration of a Facility for Film Cooling Research (2007)
Porter, J. S., Sargison, J. E., Henderson, A. D.
An existing open circuit wind tunnel has been modified to incorporate a secondary supply loop to provide controlled flow conditions at the inlet to a film cooling hole model. The primary or crossflow...
Using CFD to improve the design of a circulating water channel (2007)
Pullinger, M. G., Sargison, J. E.
Computational Fluid Dynamics (CFD) has been used as a design tool to investigate means of improving flow uniformity in the working section of a circulating water channel. The CFD model was based on a...
Andrewartha, J. M., Sargison, J. E., Perkins, K. J.
Gomphonema, a freshwater diatom, is currently being studied to determine its effect on the capacity of hydroelectric canals and the structure of turbulent boundary layers. Gomphonema is the primary...
A Force Balance to Measure the Total Drag of Biofilms on Test Plates (2007)
Barton, A. F., Sargison, J. E., Brandner, P., Walker, G. J.
A floating force balance has been designed and integrated into the working section of a to enable the measurement of total drag on test plates, which form part of the tunnel wall. Measurements...
Henderson, A. D., Sargison, J. E., Walker, G. J., Haynes, J.
A numerical study of the flow through a safety butterfly valve used in a hydro-electric power scheme to stop water supply to a downstream penstock is reported. Computational fluid dynamics applied in...