Completion of the Series Fabrication of the Main Superconducting Quadrupole Magnets of LHC (2008)
Tortschanoff, Theodor, Modena, M, Papaphilippou, Y, Rossi, L, Schirm, K M, Burgmer, R, ...
By end of November 2006, the last main superconducting quadrupole cold mass needed for the installation was delivered by ACCEL Instruments to CERN. In total, 360 cold masses for the arc regions of...
Overview and status of the Next European Dipole (NED) joint research activity (2006)
Devred, Arnaud, Baudouy, B, Baynham, D Elwyn, Boutboul, T, Canfer, S, Chorowski, M, ...
The Next European Dipole (NED) Joint Research Activity was launched on 1st January 2004 to promote the development of high performance Nb3Sn conductors in collaboration with European industry (aiming...
Overview and status of the Next European Dipole (NED) joint research activity (2006)
Devred, Arnaud, Baudouy, B, Baynham, D Elwyn, Boutboul, T, Canfer, S, Chorowski, M, ...
The Next European Dipole (NED) Joint Research Activity was launched on 1st January 2004 to promote the development of high performance Nb3Sn conductors in collaboration with European industry (aiming...
Design and optimization of the 12.5 T EFDA dipole magnet (2006)
Portone, A., Salpietro, E., Bottura, L., Bruzzone, P., Della Corte, A., Fietz, W., ...
The aim of this paper is to provide an overview of a recent study carried out-within the framework of the European Fusion Program-to design a 12.5 T superconducting dipole. By focusing on the CICC...
Conceptual design of the 12.5 T superconducting EFDA dipole (2006)
Portone, A., Salpietro, E., Boitura, L., Bruzzone, P., Fietz, W., Heller, R., ...
Within the framework of the European Fusion Programme (EFDA) a design activity has been started in late 2004 by the EFDA Close Support Unit at Garching (FRG) to design a 12.5 T superconducting dipole...
Devred, Arnaud, Baudouy, B, Baynham, D Elwyn, Boutboul, T, Canfer, S, Chorowski, M, ...
Plans for LHC upgrade and for the final focalization of linear colliders call for large aperture and/or high-performance dipole and quadrupole magnets that may be beyond the reach of conventional...
High field accelerator magnet R&D in Europe (2004)
Devred, Arnaud, Baynham, D Elwyn, Bottura, L, Chorowski, M, Fabbricatore, P, Leroy, D, ...
The LHC magnet R&D program has shown that the limit of NbTi technology at 1.9 K was in the 10-to-10.5-T range. Hence, to go beyond the 10-T threshold, it is necessary to change the superconducting...
High field accelerator magnet R&D in Europe (2004)
Devred, A., Baynham, D., Bottura, L., Chorowski, M., Fabbricatore, P., Leroy, D., ...
The LHC magnet R&D Program has shown that the limit of NbTi technology at 1.8 K was in the range 10 to 10.5 T. Hence, to go beyond the 10-T threshold, it is necessary to change of superconducting...
High field accelerator magnet R&D in Europe (2004)
Devred, A., Baynham, D., Bottura, L., Chorowski, M., Fabbricatore, P., Leroy, D., ...
The LHC magnet R&D Program has shown that the limit of NbTi technology at 1.8 K was in the range 10 to 10.5 T. Hence, to go beyond the 10-T threshold, it is necessary to change of superconducting...
High field accelerator magnet R&D in Europe (2004)
Devred, A., Baynham, D., Bottura, L., Chorowski, M., Fabbricatore, P., Leroy, D., ...
The LHC magnet R&D Program has shown that the limit of NbTi technology at 1.8 K was in the range 10 to 10.5 T. Hence, to go beyond the 10-T threshold, it is necessary to change of superconducting...
Performance of the First LHC Main Quadrupoles Made in Industry (2003)
Burgmer, R, Durante, M, Klein, H, Krischel, D, Peyrot, M, Rifflet, J M, ...
After the creation of a new dedicated factory and a period of technology transfer, ACCEL Instruments has constructed and delivered the first LHC main quadrupole magnets to CERN. The design of these...
Performance of the First LHC Main Quadrupoles Made in Industry (2003)
Burgmer, R, Durante, M, Klein, H, Krischel, D, Peyrot, M, Rifflet, J M, ...
After the creation of a new dedicated factory and a period of technology transfer, ACCEL Instruments has constructed and delivered the first LHC main quadrupole magnets to CERN. The design of these...
Test Results of the Third LHC Main Quadrupole Magnet Prototype at CEA/Saclay (2002)
Derégel, J, Devred, Arnaud, Gourdin, C, Hervieu, M, Ogitsu, T, Peyrot, M, ...
The construction of the third second-generation main quadrupole magnet prototype for LHC has been completed at CEA/Saclay in November 2000. The magnet was tested at 1.9 K. Similarly to the two first...
Launching of Series Fabrication of the LHC Main Quadrupoles (2002)
Burgmer, R, Bussjäger, R, Krischel, D, Peyrot, M, Rifflet, J M, Schmidt, P, ...
A collaboration agreement between CERN and CEA-Saclay resulted in the successful development and construction of prototypes of the LHC main superconducting quadrupole magnets and their assembly into...
Test Results of the Third LHC Main Quadrupole Magnet Prototype at CEA/Saclay (2002)
Derégel, J, Devred, Arnaud, Gourdin, C, Hervieu, M, Ogitsu, T, Peyrot, M, ...
The construction of the third second-generation main quadrupole magnet prototype for LHC has been completed at CEA/Saclay in November 2000. The magnet was tested at 1.9 K. Similarly to the two first...
Launching of Series Fabrication of the LHC Main Quadrupoles (2002)
Burgmer, R, Bussjäger, R, Krischel, D, Peyrot, M, Rifflet, J M, Schmidt, P, ...
A collaboration agreement between CERN and CEA-Saclay resulted in the successful development and construction of prototypes of the LHC main superconducting quadrupole magnets and their assembly into...
Performance of Prototypes and Start up of Series Fabrication of the LHC Arc Quadrupoles (2001)
Billan, J, Peyrot, M, Remondino, V, Rifflet, J M, Siemko, A, Simon, F, ...
The construction of three prototype arc quadrupoles for the LHC machine has been concluded successfully. These magnets underwent warm and cold magnetic measurements as well as many other tests, both...
Performance of Prototypes and Start up of Series Fabrication of the LHC Arc Quadrupoles (2001)
Billan, J, Peyrot, M, Remondino, Vittorio, Rifflet, J M, Siemko, A, Simon, F, ...
The construction of three prototype arc quadrupoles for the LHC machine has been concluded successfully. These magnets underwent warm and cold magnetic measurements as well as many other tests, both...
A. Devred, C. Gourdin, F. Kircher, J. P. Lottin, J. M. Rifflet
We present a preliminary design of the superconducting final focusing quadrupole magnets for TESLA and all their associated cryogenics.
Bergot, J B, Dambre, P, Nielsen, L, Parma, Vittorio, Peyrot, M, Renaglia, T, ...
The 360 Short Straight Sections (SSS) necessary for the eight arcs of the LHC machine have to fulfil different requirements. Their main function is to house the lattice two-in-one superconducting...
Peyrot, M, Redaelli, S, Remondino, V, Rifflet, J M, Scandale, Walter, Simon, F, ...
The room temperature magnetic measurements of the first series-design prototypes of the LHC main quadrupoles are analysed. Data relative to the collared coils and to the assembled cold mass are...
Performance of Series-Design Prototype Main Quadrupoles for the LHC (2000)
Billan, J, Bottura, L, Peyrot, M, Remondino, V, Rifflet, J M, Siemko, A, ...
After the successful construction of two first-generation prototypes of the main quadrupoles for the LHC, three series-design prototypes have been further manufactured at CEA-Saclay. Together with...
Peyrot, M, Redaelli, S, Remondino, Vittorio, Rifflet, J M, Scandale, Walter, Simon, F, ...
The room temperature magnetic measurements of the first series-design prototypes of the LHC main quadrupoles are analysed. Data relative to the collared coils and to the assembled cold mass are...
Bergot, J B, Dambre, P, Nielsen, L, Parma, Vittorio, Peyrot, M, Renaglia, T, ...
The 360 Short Straight Sections (SSS) necessary for the eight arcs of the LHC machine have to fulfil different requirements. Their main function is to house the lattice two-in-one superconducting...
Performance of Series-Design Prototype Main Quadrupoles for the LHC (2000)
Billan, J, Bottura, L, Peyrot, M, Remondino, Vittorio, Rifflet, J M, Siemko, A, ...
After the successful construction of two first-generation prototypes of the main quadrupoles for the LHC, three series-design prototypes have been further manufactured at CEA-Saclay. Together with...
Construction of the new prototype cold masses for the arc short straight sections of LHC (2000)
Peyrot, M, Rifflet, J M, Simon, F, Védrine, P, Tortschanoff, Theodor
Peyrot, M, Rifflet, J M, Simon, F, Tortschanoff, Theodor, Védrine, P
Each cold mass of the short straight sections in the eight LHC arcs will contain a 3.25 m long twin aperture quadrupole of a nominal gradient of 223 T/m. This magnet will be aligned in a 5.3 m long...
Peyrot, M, Rifflet, J M, Simon, F, Tortschanoff, Theodor, Védrine, P
Each cold mass of the short straight sections in the eight LHC arcs will contain a 3.25 m long twin aperture quadrupole of a nominal gradient of 223 T/m. This magnet will be aligned in a 5.3 m long...
Status of the Cold Mass of the Short Straight Section for the LHC (1998)
Rifflet, J M, Peyrot, M, Rohmig, P, Tortschanoff, Theodor, Védrine, P
In the framework of the LHC (Large Hadron Collider) R&D program, CERN and CEA-Saclay have collaborated to develop and construct two quadrupole magnet prototypes which have been successfully...
Cameron, W, Dambre, P, Kurtyka, T, Parma, Vittorio, Renaglia, T, Rifflet, J M, ...
The lattice of the CERN Large Hadron Collider (LHC) contains 364 Short Straight Section (SSS) units, one in every 53 m long half-cell. An SSS consists of three major assemblies: the standard cryostat...
Cameron, W, Dambre, P, Kurtyka, T, Parma, Vittorio, Renaglia, T, Rifflet, J M, ...
The lattice of the CERN Large Hadron Collider (LHC) contains 364 Short Straight Section (SSS) units, one in every 53 m long half-cell. An SSS consists of three major assemblies: the standard cryostat...
The short straight sections for the LHC (1997)
Tortschanoff, Theodor, Parma, Vittorio, Rohmig, P, Peyrot, M, Rifflet, J M, Védrine, P, ...
During more than five years a close collaboration between CERN and CEA-Saclay led to the development and construction of two prototype quadrupole magnets and the integration of one of them into the...
The short straight sections for the LHC (1997)
Tortschanoff, Theodor, Parma, Vittorio, Rohmig, P, Peyrot, M, Rifflet, J M, Védrine, P, ...
During more than five years a close collaboration between CERN and CEA-Saclay led to the development and construction of two prototype quadrupole magnets and the integration of one of them into the...
Proposal of a K-modulation system for the LHC quadrupoles (1996)
Derégel, J, Genevey, P, Rifflet, J M, Galbraith, Peter, Henrichsen, K N
Cryogenic and mechanical measurements of the first two LHC lattice quadrupole prototypes (1994)
Henrichsen, K N, Rodríguez-Mateos, F, Siegel, N, Tortschanoff, Theodor, Rifflet, J M, Cortella, J M, ...
Mechanical tests on the prototype LHC lattice quadrupole (1994)
Siegel, N, Tortschanoff, Theodor, Védrine, P, Rifflet, J M, Pérot, J, Gallet, B, ...