Phase separation micromolding: a new generic approach for microstructuring various materials (2005)
Vogelaar, L., Lammertink, R.G.H., Barsema, J.N., Nijdam, W., Versteeg, L.A.M., ...
Phase separation micromolding (PSM) is a versatile microfabrication technique that can be used to structure a very broad range of polymers, including block copolymers and biodegradable and conductive...
Barsema, J.N., Koops, G.H., Wessling, M.
We prepared dense flat-sheet Ag-functionalized carbon molecular-sieve (CMS) membranes from blends of P84 co-polyimide and a sulfonated poly(ether ether ketone) with a Ag+ counterion (AgSPEEK). These...
Intermediate polymer to carbon gas separation membranes based on Matrimid PI (2004)
Barsema,J. N., Klijnstra,S. D., Balster,J. H., Koops,G. H., Wessling,M.
Intermediate polymer to carbon gas separation membranes based on matrimid PI (2004)
Barsema, J.N., Klijnstra, S.D., Balster, J.H., Koops, G.H., Wessling, M.
Matrimid polyimide gas separation membranes were exposed to different heat treatments between 300 and 525 °C to investigate the intermediate structures that evolve between annealing and...
Hybrid organic inorganic nylon-6/SiO2 nanocomposites: transport properties (2004)
Barsema, J.N., Galindo, R.E., Cangialosi, D., Garcia-Turiel, J., Zyl, W.E. Van, ...
Organic-inorganic hybrid membranes of nanosized SiO2-filled polyamide composites were prepared via film casting and their transport properties were studied. Gas permeation measurements were performed...
Hybrid Organic Inorganic Nylon-6/SiO2 Nanocomposites: Transport and Mechanical Properties (2004)
Barsema, J.N., Zyl, W.E. Van, Verweij, H., Garcia, M., Chavez, F.
Intermediate polymer to carbon gas separation membranes based on Matrimid PI (2004)
Barsema, J. N., Klijnstra, S. D., Balster, J. H., Koops, G. H., Wessling, M.
Intermediate polymer to carbon gas separation membranes based on matrimid PI (2004)
Barsema, J.N., Klijnstra, S.D., Balster, J.H., Koops, G.H., Wessling, M.
Matrimid polyimide gas separation membranes were exposed to different heat treatments between 300 and 525 °C to investigate the intermediate structures that evolve between annealing and...
Barsema, J.N., Bostoen, C.L., Jansen, R.H.S., Mulder, M.H.V., Nauta, W.J., Steeman, P.A.M., ...
Addition of low amounts of additives is necessary to guarantee dimensional stability of low-density flexible polyethylene foam after extrusion. It is expected that the additives form a layer on the...
Barsema, J.N., Kapantaidakis, G., Koops, G.H., Wessling, M.
In this work, the preparation, the characterization, and the permeation properties of dense flat sheet and asymmetric hollow fiber membranes, based on BTDA-TDI/MDI co-polyimide (P84), are reported....
Functionalized Carbon Molecular Sieve membranes containing Ag-nanoclusters (2003)
Barsema, J.N., Balster, J.H., Jordan, V., Wessling, M.
In Carbon Molecular Sieve (CMS) membranes, the separation of O2 and N2 is primarily based on the difference in size between the gas molecules. To enhance the separation properties of these CMS...
Barsema, J.N., Kapantaidakis, G.C., Koops, G.H., Wessling, M.
In this work, the preparation, the characterization, and the permeation properties of dense flat sheet and asymmetric hollow fiber membranes, based on BTDA-TDI/MDI co-polyimide (P84), are reported....
Functionalized Carbon Molecular Sieve membranes containing Ag-nanoclusters (2003)
Barsema, J.N., Balster, J., Jordan, V., Wessling, M.
In Carbon Molecular Sieve (CMS) membranes, the separation of O2 and N2 is primarily based on the difference in size between the gas molecules. To enhance the separation properties of these CMS...
Carbon molecular sieve membranes prepared from porous fiber precursor (2002)
Barsema, J.N., Koops, G.H., Wessling, M.
Carbon molecular sieve (CMS) membranes are usually prepared from dense polymeric precursors that already show intrinsic gas separation properties. The rationale behind this approach is that the...