Feasibility of prostate cancer detection by triple spectroscopy (2008)
Salomon, G., Hess, T., Eichelberg, C., Greschner, S., Schreiber, J., Sobchuk, A.N., ...
Residual stresses in a shape welded steel tube by neutron diffraction (2008)
Taran, Y.V., Balagurov, A.M., Schreiber, J., Stuhr, U.
Measurements of the triaxial residual strains in a composite tube from an austenitic stainless steel as a parent material and a shape welded ferritic steel were carried out by the time-of-flight...
Taran, Y.V., Balagurov, A.M., Sheverev, S.G., Schreiber, J., Korsunsky, A.M., Vorster, W.J.J., ...
Fatigue and fracture under multiaxial stresses are among the most important current research topics aimed at ensuring improved reliability of industrial components. An ex situ in-plane biaxial low...
Longitudinal Ion Acceleration from High-Intensity Laser Interactions with Underdense Plasma (2007)
Willingale, L., Mangles, S. P. D., Nilson, P. M, Clarke, R. J., Dangor, A. E., Kaluza, M. C., ...
Longitudinal ion acceleration from high-intensity (I ~ 10^20 Wcm^-2) laser interactions with helium gas jet targets (n_e ~ 0.04 n_c) have been observed. The ion beam has a maximum energy for He^2+ of...
3D simulations of surface harmonic generation with few-cycle laser pulses (2007)
Geissler, Michael, Rykovanov, Sergey, Schreiber, J., Tsakiris, George D.
Taran, Y.V., Schreiber, J., Balagurov, A.M., Stuhr, U., Kockelmann, H., Zlokazov, V.B.
The triaxial residual stresses in a composite tube from an austenitic stainless steel with a welded ferritic steel cladding were measured by the time-of-flight neutron diffraction method on the POLDI...
The SERS and TERS-effect obtained by gold droplets on top of Si-nanowires. (2007)
Becker, M., Sivakov, V., Andrä, G., Geiger, R., Schreiber, J., Hoffmann, S., ...
Köhler, B., Murray, P., Shin, E., Lipfert, S., Schreiber, J.
We studied nanoparticles by several high resolution microscopic methods as scanning electron microscopy (SEM), transmission electron microscopy (TEM) and scanning probe techniques especially atomic...
Murray, P., Köhler, B., Lipfert, S., Kaspar, J., Schreiber, J.
We have formed nanoparticles of Si, C, Ti, and Fe by pulsed laser ablation and have explored the feasibility of passivating these particles during the synthesis process in order to minimize particle...
Klaas, U., Walker, H. J., Müller, T. G., Richards, P. J., Schreiber, J.
Context: .ISOPHOT multi-aperture photometry is an efficient method to resolve compact sources or to detect extended emission down to relatively faint levels with single detectors in the wavelength...
SINFONI data reduction software (2006)
Abuter, R., Schreiber, J., Eisenhauer, F., Ott, T., Horrobin, M., Gillesen, S.
Collimated multi-MeV ion beams from high-intensity laser interactions with underdense plasma (2006)
Willingale, L, Mangles, SPD, Nilson, PM, Clarke, RJ, Dangor, AE, Kaluza, MC, ...
A beam of multi-MeV helium ions has been observed from the interaction of a short-pulse high-intensity laser pulse with underdense helium plasma. The ion beam was found to have a maximum energy for...
Taran, Y.V., Schreiber, J., Daymond, M.R., Oliver, E.C.
On ECRS-6[1], we have presented first results of the researches of fatigue degradation and martensitic transformation of austenitic stainless steel AISI 321 by neutron diffraction stress analysis. A...
Taran, Y.V., Daymond, M.R., Oliver, E.C., Schreiber, J.
The elastoplastic properties of a stainless steel AISI 321 with austenitic matrix and martensitic inclusions induced during cyclic tensile-compressive fatigue loading were studied using neutron...
SINFONI data reduction software (2006)
Abuter, R., Schreiber, J., Eisenhauer, F., Ott, T., Horrobin, M.J., Gillesen, S.
The adaptive optics assisted near-infrared integral-field spectrograph SINFONI has been successfully commissioned at the ESO VLT and has started science operations early 2005. Its data reduction...
Time-resolved THz emission from laser-accelerated electron bunches (2006)
Karsch, S, Major, Zs, Hörlein, R, Veisz, L, Schmid, K, Schreiber, J, ...
Anordnung zur Detektion von Roentgenstrahlung und Verfahren zu deren Herstellung (2005)
Schreiber, J., Baumbach, T., Hirsch, O.
WO2004104635 A UPAB: 20050112 NOVELTY - The arrangement has a sensitive layer (1) of semiconducting material that absorbs x-ray radiation, that is contacted on one side by a covering electrode and...
Zerstörungsfreie Prüfverfahren für die Elektronik, mikrobearbeitete Strukturen und Baugruppen (2005)
Köhler, B., Schreiber, J., Bendjus, B., Herms, M., Melov, V.G., Krüger, P., ...
NDE techniques for electronics, micromachined structures, and assembling are outlined. The applied methods comprise acoustic, thermal, optical, and X-ray techniques. Additionally, scanning electron...
Barkhausen in Dresden - Vor einem großen Jubiläum - Neue Anwendungen seiner Entdeckung (2005)
Meyendorf, N., Schreiber, J., Altpeter, I.
Mehr als 85 Jahre nach der Entdeckung Barkhausens nimmt diese heute einen wichtigen Platz bei der Charakterisierung magnetischer und metallischer Materialien ein, wie z. B. zur Bestimmung der...
Study of local infrared bright galaxies with HERSCHEL-PACS (2005)
Contursi, A., Sturm, E., Lutz, D., Verma, A., Genzel, R., Lehnert, M., ...
Not Available
Laser accelerated, high quality ion beams (2005)
Roth, M, Blazevic, A, Brambrink, E, Geissel, M, Cowan, TE, Fuchs, J, ...
Intense beams of protons and heavy ions have been observed in ultra-intense laser-solid interaction experiments. Thereby, a considerable fraction of the laser energy is transferred to collimated...
Taran, Y.V., Daymond, M.R., Eifler, D., Nebel, T., Schreiber, J.
The elastoplastic properties of a stainless steel with an austenitic matrix and martensitic inclusions induced during cyclic tensile-compressive fatigue loading were studied using neutron...
Laser accelerated ions and electron transport in ultra-intense laser matter interaction (2005)
Roth, M, Brambrink, E, Audebert, P, Blazevic, A, Clarke, R, Cobble, J, ...
Cambios inducidos en nanotubos de carbono de capa única durante los procesos de purificación (2004)
Callejas, M. Alicia, Benito, A. M., Ansón Casaos, Alejandro, Maser, Wolfgang K., Cochet, M., ...
La publicación original está disponible en http://boletines.secv.es/es/index.php
First results from SPIFFI. I: The Galactic Center (2004)
Horrobin, M., Eisenhauer, F., Tecza, M., Thatte, N., Genzel, R., Abuter, R., ...
Köhler, B., Schreiber, J., Bendjus, B., Herms, M., Melov, V., Helfen, L., ...
NDE activities at the Laboratory for Acoustic Diagnosis and Quality Assurance (EADQ) Dresden are outlined. The applied methods comprise acoustic, thermal, optical, and X-ray ones. Additionally,...
Materials characterization of micro-devices (2004)
Schreiber, J., Bendjus, B., Köhler, B., Melov, V., Baumbach, T.
During the design of ever smaller sized micro-systems, the question appears how much the properties of the materials used differ from those of bulk material and even to laterally extended thin films....
Improved mechanical properties of metallic micro-structures (2004)
Schreiber, J., Braun, S., Gatto, A., Schenk, H.
Properties of materials used in micro- and nano-technology are rather different from those of bulk material and even to lateral macroscopic extended thin films. Designing MOEMs components, it has to...
Carbon buffer layers for smoothing substrates of EUV and X-ray multilayer mirrors (2004)
Braun, S., Bendjus, B., Foltyn, T., Menzel, M., Schreiber, J., Weißbach, D.
Smoothing of surfaces by thin film deposition is facilitated by methods which release hyperthermal particles on the substrate. One of these techniques is pulsed laser deposition (PLD), with high...
Hermann, R., Baumbach, T., Schreiber, J.
This paper describes the functions and circuitry of a flat panel readout chip for a direct conversion X-rays into a 13-bit digital image. The readout circuit and the sensor are located on the same...
Taran, Y.V., Daymond, M.R., Schreiber, J.
Austenitic stainless steel AISI 321 samples subjected to low-cycle fatigue (LCF) were analysed using in situ neutron diffraction stress rig experiments on the ENGIN instrument at the ISIS pulsed...
Cambios inducidos en nanotubos de carbono de capa única durante los procesos de purificación (2004)
Martínez, M. T., Callejas, M.A., Benito, A.M., Cochet, M., Seeger, T., Ansón, A., ...
SINFONI - Integral Field Spectroscopy at 50 milli-arcsecond resolution with the ESO VLT (2003)
Eisenhauer, F., Bonnet, H., Abuter, R., Bickert, K., Bianca-Marchet, F., Brynnel, J., ...
SINFONI is an adaptive optics assisted near-infrared integral field spectrometer for the ESO VLT. The Adaptive Optics Module (built by the ESO Adaptive Optics Group) is a 60-elements curvature-sensor...
Qualitative new mechanical properties of microstructured metallic systems (2003)
Different micro-systems have been developed which only have in common that they are fabricated by processes know from semiconductor technology. The knowledge of used materials that has been gathered...
Haueisen, J., Schreiber, J., Brauer, H., Knösche, T. R.
Modeling in magnetocardiography is increasingly based on the boundary-element method. We quantify the influence of the boundary-element discretization on the cardiomagnetic forward and inverse...
Taran, Y.V., Daymond, M., Eifler, D., Nebel, T., Schreiber, J.
The elastoplastic properties of the austenitic matrix and martensitic volume areas induced during cyclic tensile-compressive loading of low carbon metastable austenitic stainless steel were studied...
Taran, Y., Daymond, M., Eifler, D., Nebel. Th., Schreiber, J.
The elastic and plastic properties of the austenitic matrix and martensitic areas induced during cyclic tensile-compressive loading of low carbon metastable austenitic stainless steel were studied in...
Taran, Y., Daymond, M., Eifler, D., Nebel, T., Schreiber, J.
The elastic and plastic properties of the austenitic matrix and martensitic areas induced during cyclic tensile-compressive loading of low carbon metastable austenitic stainless steel were studied in...
Stress development in Ni/C-multilayers on Si-substrates with increasing period number (2002)
Schreiber, J., Melov, V., Dietsch, R.
For Ni/C X-ray optical multilayers, fabricated by pulsed laser deposition (PLD) at room temperature with typical period thickness d approximately=4.0 nm, stress is evaluated with growing period...
Taran, Y.V., Daymond, M., Eifler, D., Nebel, T., Schreiber, J.
The elastoplastic properties of the austenitic matrix and martensitic volume areas induced during cyclic tensile-compressive loading of low carbon metastable austenitic stainless steel were studied...
Lauter-Pasyuk, V., Lauter, H., Toperverg, B., Petrenko, A., Schubert, D., Schreiber, J., ...
Free-surface and interface properties of a polystyrene-polybuthylmethacrylate multilayer film are studied by neutron specular reflection and off-specular scattering. Experimental data collected over...
Taran, Y.V., Daymond, M.R., Eifler, D., Schreiber, J.
The fatigue behaviour of austenitic stainless steel, in which a martensitic phase is formed due to plastic deformation, is of some interest for practical reasons. Earlier, we reported the results of...
Taran, Y.V., Daymond, M.R., Schreiber, J.
A study of the elastic and plastic properties of the austenitic base matrix and martensitic precipitates induced in stainless steel during high cycling tensile-compressive loading was made in the in...
Cauchy-like relation between elastic constants in amorphous materials (2002)
Krüger, J.K., Baller, J., Britz, T., Le Coutre, A., Peter, R., Bactavatchalou, R., ...
It is well known that in addition to the longitudinal modulus, viscoelastic liquids show a shear stiffness at sufficiently high probe frequencies due to structural relaxations. For probe frequencies...
Haueisen, J., Schreiber, J., Brauer, H., Knösche, T. R.
Modeling in magnetocardiography is increasingly based on the boundary-element method. We quantify the influence of the boundary-element discretization on the cardiomagnetic forward and inverse...
Kuznetsov, P.V., Panin, V.E., Schreiber, J.
A technique for defining the fractal dimension of the deformed specimen is considered by using surface relief images obtained from a scanning electron microscope. By subjecting the austenitic...
Dietsch, R., Holz, T., Weißbach, D., Melov, V., Schreiber, J., Scholz, R.
The evolution of intrinsic stress in multilayers and its behavior with growing number of periods and/or during radiation exposure, i.e. thermal treatment, becomes important in many X-ray optical...
Distribution of macro- and micro-stresses in W-Cu FGMs (2001)
Schreiber, J., Neubrand, A., Wieder, T., Stalder, M., Shamsutdinov, N.
Schreiber, J., Herms, M., Fukuzawa, M., Yamada, M.
A comprehensive procedure as how to record the spatial distribution of residual strain and stress respectively, in semiconductor single crystal wafers by Scanning Infrared Polariscopy (SIRP) and High...
Studies on phase transformations of Cu-phthalocyanine thin films (2000)
Berger, O., Adolphi, B., Tierbach, S., Melov, V.G., Schreiber, J.
Copper phthalocyanine (CuPc) thin films were obtained by sublimation technique on Siwafer substrates maintained at room temperature. As-deposited CuPc films with less than 0.1µm thickness...