An empirical scaling for deuterium retention in co-deposited beryllium layers (2008)
De Temmermann, G., Baldwin, M. J., Doerner, R. P., Nishijima, D., Schmid, K.
Einsatzmöglichkeiten statistischer Verfahren zur Prüfung und Bewertung analytischer Methoden (2007)
In der analytischen Praxis tritt immer wieder die Frage auf, ob und inwieweit die Qualität einzelner Analysenergebnisse von den zahlreichen möglichen Einflussgrößen abhängt. So sollte bekannt...
Koenig, T., Olsson, T., Schmid, K., Adam, S.
This report describes the results of an empirical investigation in which the effectiveness and efficiency of change impact analysis using the notations of EPC and Use Cases were compared.
Koenig, T., Olsson, T., Schmid, K., Adam, S.
This report describes the results of an empirical investigation in which the effectiveness and efficiency of change impact analysis using the notations of EPC and Use Cases were compared.
Final Steps to an All Tungsten Divertor Tokamak (2007)
Neu, R., Bobkov, V., Dux, R., Kallenbach, A., Pütterich, T., Greuner, H., ...
Mechanische Eigenschaften von Nickelschichten - Möglichkeiten zur Messung und Optimierung (2006)
Bei den mechanischen Eigenschaften galvanischer Nickelschichten spielen die inneren Spannungen eine qualitätsbestimmende Rolle. Nach einer kurzen Einführung und Begriffsbestimmung werden drei der...
Automobil- und Antriebstechnik. Produktionstechnische Grundlagen (2006)
Ausgehend von Grundprinzip der galvanischen Abscheidung werden verschiedene Möglichkeiten der produktionstechnischen Umsetzung von galvanischen Beschichtungsverfahren dargestellt. Alternative...
Requirements management for product lines: Extending professional tools (2006)
Schmid, K., Krennrich, K., Eisenbarth, M.
The key idea of software product lines is the integrated development of a set of products, exploiting commonalities and variabilities among the products to achieve high levels of reuse. The...
Elektrochemisch generierte Schichtwerkstoffe und Kombinationsschichten (2006)
Nach einer kurzen Erläuterung des Prinzips der galvanischen Metallabscheidung und einem Blick auf die werkstofftechnischen Grundlagen, werden anhand von Beispielen die grundlegenden Möglichkeiten...
Kohler, K., Kerkow, D., Hess, S., Schmid, K.
Der vorliegende Bericht beschreibt die Ergebnisse einer Arbeit, die im Rahmen der KMU Forschungslaborplattform des Landes Rheinland-Pfalz innerhalb des Clusters "Produktlinien und...
Introducing the PuLSE approach to an embedded system population at testo AG (2005)
Schmid, K., John, I., Kolb, R., Meier, G.
Over the last few years, product line engineering has become a major theme in software engineering research, and is increasingly becoming a central topic of software engineering practice in the...
Reuse-oriented requirements technique: Adaptive services grid deliverable D6.I-2 (2005)
Eisenbarth, M., Bayer, J., Koenig, T., Grund, M., Schmid, K.
Introducing the PuLSE approach to an embedded system population at Testo AG (2004)
Schmid, K., John, I., Kolb, R., Meier, G.
Over the last years product line engineering became a major theme in software engineering research and increasingly becomes a central topic of software engineering practice in the embedded domain....
Qualität im Automobil: Systematische Definition nichtfunktionaler Anforderungen (2004)
Doerr, J., Olsson, T., Schmid, K.
In diesem Artikel haben wir einen Ansatz zur effizienten Identifikation und Dokumentation von nichtfunktionalen Anforderungen vorgestellt, der insbesondere zur Erfassung von Zuverlässigkeits- und...
Domain-specific customization of modeling languages (2004)
Most, if not all, specification approaches are more appropriate for modeling in one domain than in another. At this point, there does not exist an approach for selecting a modeling technique for a...
Key challenges in industrial product line engineering (2004)
Maßen, T. Von Der, Birk, A., Heller, G., John, I., Schmid, K., Joos, S., ...
This paper summarizes the results of the "Gesellschaft für Informatik" (GI) working group on "Requirements Engineering for Software Product Lines" which is part of the...
Table of Contents: Klaus Schmid Introduction to PLEES'03: Relating Product Line Adoption Mode and Transitioning Process Daniel J. Paulish Product Line Engineering for Global Development Eelco...
Report of the GI Work Group "Requirements Engineering for Product Lines" (2003)
Birk, A., Heller, G., John, I., Joos, S., Müller, K., Schmid, K., ...
This report summarizes the results of the GI working on "Requirements Engineering for Software Product Lines", a working of the GI 2.1.6. This work group met regularly to identify the key...
Product line engineering industrial nuts and bolts (2003)
Birk, A., Heller, G., John, I., Maßen, T. Von Der, Müller, K., Schmid, K.
Software product lines (SPL) are a powerful concept for ensuring quality, economic efficiency, and manageability of families of software systems. SPL are relevant to large industrial enterprises that...
People management in institutionalizing product lines (2003)
Currently, the key approach to large-scale software reuse is product line development, an approach built upon the systematic development of building blocks for reuse. While most work on product lines...
Softwareproduktlinien entstehen wo auch immer Produkte in Varianten entwickelt werden. Dies stellt ein gigantisches Wiederverwendungspotential dar, schafft aber auch Schwierigkeiten, vor allem für...
Bayer, J., Ganesan, D., Knodel, J., Kolb, R., Schmid, K.
The success of a product family depends greatly on the quality of its reference architecture. To achieve high-quality reference architectures, it is important to leverage the experience embodied in...
The streptozotocin-diabetic rat as a model of the chronic complications of human diabetes (2003)
Wei, M., Ong, L., Smith, M. T., Ross, F. B., Schmid, K., Hoey, A., ...
An initial model of product line economics (2002)
In this paper we describe an initial model of product line economics, which aims at filling exactly this gap. The model integrates characteristics of the software process with aspects of the market,...
The product line mapping approach to defining and structuring product portfolios (2002)
A key activity in product line development is to define and structure the product portfolio which shall be the basis for product line development. In this paper we present an approach that aims at...
Developing, validating and evolving an approach to product line benefit and risk assessment (2002)
Product line engineering is usually a very beneficial, but sometimes also a very risky endeavor, as there is no guarantee for economic success. In this paper, we will describe an assessment approach...
A comprehensive product line scoping approach and its validation (2002)
Product Line Engineering is a recent approach to software development that specifically aims at exploiting commonalities and systematic variabilities among functionally overlapping systems in terms...
Integrating reference architecture definition and reuse investment planning (2002)
When developing a product line, the definition of an appropriate reference architecture that supports the required variabilities is of crucial importance to the success of the product line. In this...
International Workshop on Reuse Economics (2002)
Favaro, J., Erdogmus, H., Schmid, K.
Traditionally reuse economics has by and large concentrated on return on investment in formal, systematic reuse based on traditional cost-benefit models. Of prime importance in that context was cost...
Table of Contents Birgit Geppert and Klaus Schmid: PLEES'01: International Workshop on Product Line Engineering - The Early Steps: Planning, Modeling, and Managing. Alessandro Maccari:...
John, I., Knauber, P., Muthig, D., Schmid, K., Widen, T.
Motivation Die mittelständische Wirtschaft kann mittel- und langfristig nicht mit den großen internationalen Firmen im Bereich der Massenfertigung oder durch das Angebot von Standardprodukten...
Introducing a Software Modeling Concept in a Medium-Sized Company (2000)
Schmid, K., Becker-Kornstaedt, U., Knauber, P., Bernauer, F.
The Potential of Microreactors for the Synthesis of Energetic Materials (2000)
Krause, H., Löbbecke, S., Marioth, E., Schmid, K., Antes, J., Türcke, T.
Vliegenthart, J.F.G., Marti, T., Schaller, J., Rickli, E.E., Schmid, K., Kamerling, J.P., ...
The structures of the N-and O-glycans of human, bovine and porcine plasminogen were determined by 500-MHz 1H-NMR spectroscopy. The N-glycans of all three species proved to be of the...
Vliegenthart, J.F.G., Akiyama, K., Simons, Elizabeth R., Bernasconi, P., Schmid, K., Halbeek, H. Van, ...
Vliegenthart, J.F.G., Gejyo, F., Bürgi, W., Schmid, K., Offner, G.D., ...
a2HS-Glycoprotein, a normal human plasma protein, was recently shown to consist of two polypeptide chains. In the present study, we have separated these two chains from one another and have...
The structure of the major carbohydrate unit of human plasma b2-glycoprotein-I (1983)
Vliegenthart, J.F.G., Bürgi, W., Endo, M., Schmid, K., Haupt, H., ...
Vliegenthart, J.F.G., Halbeek, H. Van, Dorland, L., Montreuil, J., Fournet, B., Schmid, K.
Five hundred-MHz 1H-NMR spectroscopy was employed to study a monofucosylated tetra-antennary glycopeptide fraction which was derived from human plasma a1-acid glycoprotein. This fraction was earlier...
Structure of 10 glycopeptides from a1-acid glycoprotein (1979)
Vliegenthart, J.F.G., Fournet, B., Strecker, G., Spik, G., Montreuil, J., Schmid, K., ...
Vliegenthart, J.F.G., Fournet, B., Montreuil, J., Strecker, G., Dorland, L., Haverkamp, J., ...
The present study was initiated in order to determine the primary structures of the carbohydrate units of desialyzed human plasma al-acid glycoprotein. In an earlier investigation I6 glycopeptides...
Materialien in der Kernfusion: Plasmabelastung und chemisches Verhalten
Linsmeier, C., Bolt, H., Balden, M., Brendel, A., Ertl, K., Koch, F., ...
Neue Materialien für den Einsatz unter extremen Anforderungen in der Kernfusion
Linsmeier, C., Bolt, H., Balden, M., Brendel, A., Koch, F., Levchuk, D., ...
Estimations of erosion fluxes, material deposition and tritium retention in the divertor of ITER
Kirschner, A., Borodin, D., Philipps, V., Samm, U., Schmid, K., Roth, J., ...