Prediction of critical current-bending strain relation of Bi2223 composite tape using residual strain of filaments, load-strain curve and geometry of cross-section (2009)
Ochiai, Shojiro,
Okuda, H.,
Matsubayashi, H.,
Mukai, Y.,
Shin, J.K.,
Iwamoto, S.,
...
A prediction method of the critical current-bending strain relation of the Bi2223 composite tape, which was bent at room temperature and cooled down to 77 K for measurement of critical current, was...
Two different mechanisms of fatigue damage due to cyclic stress loading at 77 K for MOCVD-YBCO-coated conductors (2008)
Sugano, M,
Yoshida, Y,
Hojo, M,
Shikimachi, K,
Hirano, N,
Nagaya, S
Modeling analysis of distribution of irreversible bending strain for critical current in Bi2223-composite tape (2008)
Ochiai, S,
Shin, JK,
Mukai, Y,
Matsubayashi, H,
Okuda, H,
Sugano, M,
...
編物構造複合材料の再生医療用スカフォールドへの適用(1) 生分解性樹脂による編物構造複合材料の開発 (2008)
Tanaka, N,
Hiwa, C,
Imoto, T,
Adachi, T,
Hojo, M,
Baba, S
編物構造複合材料の再生医療用スカフォールドへの適用(2) マウス骨芽細胞様細胞による骨組織形成過程 (2008)
Hiwa, C,
Okizoe, T,
Nakai, Y,
Tanaka, N,
Adachi, T,
Hojo, M,
...
Analysis of the distribution of critical current of bent Bi2223 composite tape based on a unifying parameter approach (2008)
Ochiai, S,
Shin, JK,
Okuda, H,
Sugano, M,
Hojo, M,
Osamura, K,
...
Evaluation of Mechanical and Biodegradable Properties on Composite Scaffolds Composed of Three-Dimensional Fabric Structure (2008)
Hiwa, C,
Yokota, K,
Nakai, Y,
Tanaka, N,
Imoto, T,
Adachi, T,
...
International round robin test for mechanical properties of Nb3Sn superconductive wires at room temperature (2008)
Osamura, K,
Nyilas, A,
Thoener, M,
Seeber, B,
Fluekiger, R,
Ilyin, Y,
...
International round robin test for mechanical properties of Nb§3Sn superconductive wires at room temperature. (2008)
Osamura, K.,
Nyilas, A.,
Thoener, M.,
Seeber, B.,
Flükiger, R.,
Ilyin, Y.,
...
Superconductor Science and Technology, 21(2008) S.045006/1-10
Analytical modeling of stress-strain behavior at 1873 K of alumina/YAG composite compressed parallel and perpendicular to the solidification direction (2007)
Ochiai, S,
Sakai, Y,
Kuhara, K,
Iwamoto, S,
Sha, JJ,
Okuda, H,
...
Direct measurement of mechanical properties of Bi2223 filament using Ag alloy removed tape (2007)
Hojo, M.,
Hashimoto, M.,
Tanaka, M.,
Adachi, T.,
Sugano, M.,
Ochiai, S.,
...
Statistical analysis of scatter in critical current of bent superconducting Bi2223 composite tape (2007)
Ochiai, S.,
Fujimoto, M.,
Shin, J. K.,
Okuda, H.,
Hojo, M.,
Osamura, K.,
...
Modeling analysis of the critical current of bent Bi2223 composite tape based on the damage strain parameter and the shape of the core (2007)
Ochiai, S.,
Matsuoka, T.,
Shin, J. K.,
Okuda, H.,
Sugano, M.,
Hojo, M.,
...
Thermally induced residual strain accumulation in Bi2223/Ag/Ag alloy composite superconductor (2007)
Ochiai, S.,
Rokkaku, H.,
Morishita, K.,
Shin, J. K.,
Iwamoto, S.,
Okuda, H.,
...
Modes I and II interlaminar fracture toughness and fatigue delamination of CF/epoxy laminates with self-same epoxy interleaf (2006)
Hojo, M,
Ando, T,
Tanaka, M,
Adachi, T,
Ochiai, S,
Endo, Y
Variation of local critical current and its influence on overall current of bent multifilamentary Bi2223/Ag tape (2006)
Ochiai, S,
Doko, D,
Rokkaku, H,
Fujimoto, M,
Okuda, H,
Hojo, M,
...
Direct measurement of elastic modulus of Nb3Sn using extracted filaments from superconducting composite wire and resin impregnation method (2006)
Hojo, M,
Matsuoka, T,
Hashimoto, M,
Tanaka, M,
Sugano, M,
Ochiai, S,
...
Proposal of suppression of delamination for the foam core sandwich panel joint with filler (2006)
Hirose, Y,
Nishitani, M,
Ochi, S,
Fukumoto, K,
Kawasaki, T,
Hojo, M
On the measurement of tensile properties of superconducting Nb§3Sn wires at ambient temperature and at cryogenic environment. (2006)
Nyilas, A.,
Weiss, K.,
Thoener, M.,
Hojo, M.,
Osamura, K.,
Katagiri, K.
Balachandran, U. [Hrsg.]
Thermal stress-induced fracture of coating layer of galvannealed steel (2005)
Ochiai, S,
Iwamoto, S,
Tomida, T,
Okuda, H,
Tanaka, M,
Hojo, M
Fracture behavior and its shear lag - Monte Carlo simulation of SiC/SiC composite exposed in air at high temperatures (2005)
Morishita, K,
Tanaka, H,
Kimura, S,
Okuda, H,
Ochiai, S,
Tanaka, M,
...
Thermal stress-induced fracture of coating layer of galvannealed steel (2005)
Ochiai, S,
Iwamoto, S,
Tomida, T,
Okuda, F,
Tanaka, M,
Hojo, M
Tensile and bending behavior of melt growth Al2O3/YAG composite at ultra high temperatures (1773-2023K) (2005)
Ochiai, S,
Sakai, Y,
Sato, K,
Ueda, T,
Morishita, K,
Okuda, H,
...
Residual stress analysis and estimation of strength of Fe-Zn coating layer of galvannealed steel by means of finite element method (2005)
Ochiai, S,
Iwamoto, S,
Tomida, T,
Nakamura, T,
Okuda, H,
Tanaka, M,
...
Residual stress analysis and estimation of strength of Fe-Zn coating layer of galvannealed steel by means of finite element method (2005)
Ochiai, S,
Iwamoto, S,
Tomida, T,
Nakamura, TV,
Okuda, H,
Tanaka, M,
...
Fracture and peeling behavior of Fe-Zn intermetallic coating of galvannealed steel sheet (2005)
Ochiai, S,
Tomida, T,
Nakamura, T,
Iwamoto, S,
Okuda, H,
Tanaka, M,
...
Influence of delamination location on mesoscopic stress state and critical current under bending deformation in Bi2223/Ag superconducting composite tapes (2005)
Hojo, M,
Nakamura, M,
Tanaka, M,
Adachi, T,
Sugano, M,
Ochiai, S,
...
A Monte Carlo-shear lag simulation of tensile fracture behaviour of Bi2223 filament (2005)
Ochiai, S,
Ishida, T,
Doko, D,
Morishita, K,
Okuda, H,
Oh, SS,
...
Multiple-cracking phenomenon of the galvannealed coating layer on steels under thermal and tensile stresses (2005)
Ochiai, S,
Iwamoto, S,
Tomida, T,
Nakamura, T,
Okuda, H,
Tanaka, M,
...
Bending damage evolution and its influence on critical current and n-value of Bi2223/Ag superconducting composite tape (2005)
Doko, D,
Miyazaki, N,
Ochiai, S,
Okuda, H,
Oh, SS,
Tanaka, M,
...
Fracture characteristics of Al2O3/YAG composite at room temperature to 2023 K (2005)
Ochiai, S,
Sakai, Y,
Sato, K,
Tanaka, M,
Hojo, M,
Okuda, H,
...
Bending damage evolution and its influence on critical current and n-value of Bi2223/Ag superconducting composite tape (2005)
Doko, D,
Miyazaki, N,
Occhiai, S,
Okuda, H,
Oh, SS,
Tanaka, M,
...
Modelling of the transverse strength of fibre reinforced epoxy composite at low and high temperature (2005)
Fiedler, B,
Gagel, A,
Hobbiebrunken, T,
Schulte, K,
Hojo, M,
Ochiai, S
Analysis of mesoscopic stress states with delamination and their relation to critical current under bending deformation in Bi2223/Ag superconducting composite tapes (2005)
Hojo, M,
Nakamura, M,
Tanaka, M,
Adachi, T,
Sugano, M,
Ochiai, S,
...
Fracture behavior of brittle coating layer on metal substrate (2005)
Ochiai, S,
Tomida, T,
Nakamura, T,
Iwamoto, S,
Okuda, H,
Tanaka, M,
...
Influence of non-uniform fiber arrangement on tensile fracture behavior of unidirectional fiber/epoxy model composites (2005)
Tanaka, M,
Hojo, M,
Hobbiebrunken, T,
Ochiai, S,
Hirosawa, Y,
Fujita, K,
...
On the measurement of tensile properties of superconducting Nb§3Sn wires at ambient temperature and at cryogenic environment. (2005)
Nyilas, A.,
Weiss, K.,
Thoener, M.,
Hojo, M.,
Osamura, K.,
Katagiri, K.
Cryogenic Engineering Conf.(CEC) and Internat.Cryogenic Materials Conf. (ICMC), Keystone, Colo., August 29 - September 2, 2005
Investigation of mechanical behavior of copper in Nb3Sn superconducting composite wire (2004)
Hojo, M,
Matsuoka, T,
Nakamura, M,
Tanaka, M,
Adachi, T,
Ochiai, S,
...
Improvement of Young's modulus and tensile strength of polymer impregnation and pyrolysis processed SiC/SiC composite by improved continuity of matrix (2004)
Ochiai, S,
Okuda, H,
Kimura, S,
Morishita, K,
Tanaka, M,
Hojo, M,
...
Tensile and bending fracture behaviors and their influence on critical current of multifilamentary Bi2223/Ag/Ag-Mg composite tape (2004)
Ochiai, S,
Miyazaki, N,
Nagai, T,
Doko, D,
Okuda, H,
Oh, SS,
...
Nondimensional simulation of tensile behavior of UD microcomposite under energy release rate and shear stress criteria for interfacial debonding (2004)
Ochiai, S,
Hojo, M,
Tanaka, M,
Okuda, H,
Schulte, K,
Fiedler, B
Damage evolution under bending and tensile stress and its influence on critical current of Bi2223/Ag superconducting composite tape (2004)
Ochiai, S,
Miyazaki, N,
Doko, D,
Nagai, T,
Nakamura, M,
Okuda, H,
...
Thermomechanical analysis of micromechanical formation of residual stresses and initial matrix failure in CFRP (2004)
Hobbiebrunken, T,
Hojo, M,
Fiedler, B,
Tanaka, M,
Ochiai, S,
Schulte, K
Residual strength of PIP-processed SiC/SiC single-tow minicomposite exposed at high temperatures in air as a function of exposure temperature and time (2004)
Ochiai, S,
Kimura, S,
Tanaka, H,
Hojo, M,
Morishita, K,
Okuda, H,
...
Degradation of SiC/SiC composite due to exposure at high temperatures in vacuum in comparison with that in air (2004)
Ochiai, S,
Kimura, S,
Tanaka, H,
Tanaka, M,
Hojo, M,
Morishita, K,
...
Modeling of residual stress-induced stress-strain behavior of unidirectional brittle fiber/brittle matrix composite with weak interface (2003)
Ochiai, S,
Tanaka, H,
Kimura, S,
Tanaka, M,
Hojo, M,
Okuda, K
Deformation and fracture behavior of notched and unnotched unidirectional C/C-Mg composite with Young's modulus 520 GPa and tensile strength 1 GPa (2003)
Ochiai, S,
Okuda, H,
Suzuki, N,
Tanaka, M,
Hojo, M,
Tsushima, E
Bending deformation and its influence on critical current in Bi2223 composite superconducting tapes (2003)
Hojo, M,
Matsuoka, T,
Nakaoka, S,
Tanaka, M,
Ochiai, S,
Sugano, M,
...
Microscopic fracture of filaments and its relation to the critical current under bending deformation in (Bi,Pb)(2)Sr2Ca2CU3O10 composite superconducting tapes (2003)
Hojo, M,
Nakamura, M,
Matsuoka, T,
Tanaka, M,
Ochiai, S,
Sugano, M,
...
Fracture of filaments and its influence on critical current and residual strength of fatigued Nb-Ti/Cu superconducting composite (2003)
Ochiai, S,
Oki, Y,
Sekino, F,
Hojo, M,
Tanaka, M,
Okuda, H,
...
Tensile damage and its influence on the critical current of Bi2223/Ag superconducting composite tape (2003)
Ochiai, S,
Nagai, T,
Okuda, H,
Oh, SS,
Hojo, M,
Tanaka, M,
...
Deformation and fracture behavior of notched and unnotched unidirectional C/C-Mg composite with Young's modulus 520 GPa and tensile strength 1 GPa (2003)
Ochiai, S,
Okuda, H,
Suzuki, N,
Tanaka, M,
Hojo, M,
Tsushima, E
Fatigue-damage evolution and damage-induced reduction of critical current of a Nb3Al superconducting composite (2003)
Ochiai, S,
Sekino, F,
Sawada, T,
Ohno, H,
Hojo, M,
Tanaka, M,
...
Mode I and II delamination fatigue crack growth behavior of alumina fiber/epoxy laminates in liquid nitrogen (2002)
Hojo, M,
Matsuda, S,
Fiedler, B,
Kawada, T,
Moriya, K,
Ochiai, S,
...
Deformation and fracture behavior of an Al2O3/YAG composite from room temperature to 2023 K (2001)
Ochiai, S,
Ueda, T,
Sato, K,
Hojo, M,
Waku, Y,
Nakagawa, N,
...
Joining characteristics of oxidized SiC particles reinforced Al-Mg matrix composite prepared by reaction infiltration processing (2001)
Shi, ZL,
Ochiai, S,
Hojo, M,
Lee, J,
Gu, MY,
Lee, H
The oxidation of SiC particles and its interfacial characteristics in Al-matrix composite (2001)
Shi, ZL,
Ochiai, S,
Hojo, M,
Lee, J,
Gu, MY,
Lee, H,
...
Effect of interface control on fracture behavior of woven C/C composites (2001)
Hojo, M,
Yamao, T,
Tanaka, M,
Ochiai, S,
Iwashita, N,
Sawada, Y
Mode II interlaminar properties under static and fatigue loadings for CF/epoxy laminates with different fiber-surface treatment (2001)
Hojo, M,
Matsuda, S,
Ochiai, S,
Tsujioka, N,
Nakanishi, Y,
Maekawa, Z,
...
Tensile testing methods of Cu/Nb3Sn superconducting wires at room temperature (2001)
Katagiri, K,
Kasaba, K,
Hojo, M,
Osamura, K,
Sugano, M,
Kimura, A,
...
Effects of interface control and heat-treatment temperature on interlaminar shear strength and mode II Interlaminar fracture toughness of woven C/C composites (2001)
Hojo, M,
Yamao, T,
Tanaka, M,
Ochiai, S,
Iwashita, N,
Sawada, Y
Effect of interface control on mode I interlaminar fracture toughness of woven C/C composite laminates (2001)
Hojo, M,
Yamao, T,
Tanaka, M,
Ochiai, S,
Iwashita, N,
Sawada, Y
Observation and analysis of fracture process of fiber, matrix and interface in UD Si-Ti-C-O fiber-bonded composite (2001)
Tanaka, M,
Ochiai, S,
Hojo, M,
Ishikawa, T,
Kajii, S,
Matsunaga, K,
...
Differences and similarities in fatigue behaviour and its influences on critical current and residual strength between Ti-Nb and Nb3Al superconducting composite wires (2000)
Ochiai, S,
Oki, Y,
Sekino, F,
Ohno, H,
Hojo, M,
Moriai, H,
...
Fracture behavior of notched unidirectional Si-Ti-C-O/BMAS composite (2000)
Ochiai, S,
Okumura, I,
Tanaka, M,
Hojo, M,
Sato, M,
Tamura, M,
...
Fracture and damping of ionomer interleaved epoxy composites (2000)
Akimoto, A,
Shonaike, GO,
Usui, Y,
Aoki, Y,
Murakami, A,
Matsuda, S,
...
Fracture behavior of notched unidirectional Si-Ti-C-O/BMAS composite (2000)
Ochiai, S,
Okumura, I,
Tanaka, M,
Hojo, M,
Sato, M,
Tamura, M,
...
Monte Carlo simulation of tensile fracture behavior of unidirectional fiber reinforced brittle matrix composite with weak interface (2000)
Ochiai, S,
Fujita, T,
Tanaka, M,
Hojo, M,
Tanaka, R,
Miyamura, K,
...
Differences and similarities in fatigue behaviour and its influences on critical current and residual strength between Ti-Nb and Nb3Al superconducting composite wires (2000)
Ochiai, S,
Oki, Y,
Sekino, F,
Ohno, H,
Hojo, M,
Moriai, H,
...
Degradation Mechanism of SiC/Super Alpha 2 Composite Due to Interfacial Reaction (1999)
Ochiai, S.,
Inoue, T.,
Fujita, T.,
Hojo, M.,
Dudek, H.J.,
Leucht, R.
Comparison of test configurations for determination of mode II interlaminar fracture toughness results from international collaborative test programme (1999)
Davies, P,
Sims, GD,
Blackman, BRK,
Brunner, AJ,
Kageyama, K,
Hojo, M,
...
Influences of distribution of fiber strength and residual stresses on tensile strength of SiC fiber-reinforced TiA1 matrix composites (1999)
Ochiai, S,
Fujita, T,
Tanaka, M,
Hojo, M,
Tanaka, R,
Miyamura, K,
...
Multiple Cracking of a Coating Layer and Its Influence on Fibre Strength. Part I. Calculation of the Energy Release Rate of the Fibre at Cracks for Non-Uniform Crack Spacing. (1998)
Ochiai, S.,
Hojo, M.
A calculation method to describe the influence of the non-uniform crack-spacing in a strongly adhering coating layer, which shows multiple cracking, on the energy release rate of a coated fiber is...
Multiple Cracking of a Coating Layer and Its Influence on Fibre Strength. Part II. Monto Carlo Simulation. (1998)
Ochiai, S.,
Hojo, M.
Multiple cracking of a coating layer and its influence on the tensile strength of the coated fibre in the case of strong interfacial bonding were simulated by means of a monte carlo method. within...
A phase I/II trial of irinotecan–cisplatin combined with an anti-late-diarrhoeal programme to evaluate the safety and antitumour response of this combination therapy in patients with advanced non-small-cell lung cancer
Takeda, Y,
Tsuduki, E,
Izumi, S,
Hojo, M,
Kamimura, M,
Naka, G,
...
We conducted a phase I/II study in patients with advanced non-small-cell lung cancer (NSCLC) to increase the therapeutic index of the cisplatin–irinotecan combination by institution of an...