Compressive properties and energy absorption of hollow sphere aluminium (2005)
Yamada, Y., Wen, Cui`e, Asahina, T., Kato, K., Sonoda, T., Mabuchi, M.
Manufactured cellular aluminums have been developed for a wide range of automotive applications where weight savings, improved safety, crashworthiness and comfort are required. The plateau...
Yamada, Yasuo, Wen, Cui`e, Asahina, T., Mabuchi, M.
Hollow sphere cellular aluminium (HSCA) samples were fabricated by bonding together two kinds of single aluminium hollow spheres with the same outside diameter of 4 mm but different wall thicknesses...
Yamada, Yasuo, Wen, Cui`e, Asahina, T., Mabuchi, M.
Hollow sphere cellular aluminium (HSCA) samples were fabricated by bonding together two kinds of single aluminium hollow spheres with the same outside diameter of 4 mm but different wall thicknesses...
Compressive properties and energy absorption of hollow sphere aluminium (2005)
Yamada, Y., Wen, Cui`e, Asahina, T., Kato, K., Sonoda, T., Mabuchi, M.
Manufactured cellular aluminums have been developed for a wide range of automotive applications where weight savings, improved safety, crashworthiness and comfort are required. The plateau...
Compressibility of porous magnesium foam: dependency on porosity and pore size (2004)
Wen, Cui`e, Yamada, Y., Shimojima, K., Chino, Y., Hosokawa, H., Mabuchi, M.
Mechanical properties of porous magnesium with the porosity of 35–55% and the pore size of about 70–400 μm are investigated by compressive tests focusing on the effects of the porosity...
Compressibility of porous magnesium foam: dependency on porosity and pore size (2004)
Wen, Cui`e, Yamada, Y., Shimojima, K., Chino, Y., Hosokawa, H., Mabuchi, M.
Mechanical properties of porous magnesium with the porosity of 35–55% and the pore size of about 70–400 μm are investigated by compressive tests focusing on the effects of the porosity...
Novel titanium foam for bone tissue engineering (2002)
Wen, Cui`e, Yamada, Y., Shimojima, K., Chino, Y., Hosokawa, H., Mabuchi, M.
Titanium foams fabricated by a new powder metallurgical process have bimodal pore distribution architecture (i.e., macropores and micropores), mimicking natural bone. The mechanical properties of the...
Processing and mechanical properties of autogenous titanium implant materials (2002)
Wen, Cui`e, Yamada, Y., Shimojima, K., Chino, Y., Asahina, T., Mabuchi, M.
Novel titanium foam for bone tissue engineering (2002)
Wen, Cui`e, Yamada, Y., Shimojima, K., Chino, Y., Hosokawa, H., Mabuchi, M.
Titanium foams fabricated by a new powder metallurgical process have bimodal pore distribution architecture (i.e., macropores and micropores), mimicking natural bone. The mechanical properties of the...
Processing and mechanical properties of autogenous titanium implant materials (2002)
Wen, Cui`e, Yamada, Y., Shimojima, K., Chino, Y., Asahina, T., Mabuchi, M.
Processing of biocompatible porous Ti and Mg (2001)
Wen, Cui`e, Mabuchi, M., Yamada, Y., Shimojima, K., Chino, Y., Asahina, T.
A new powder manufacturing process for Ti and Mg metallic foams designs porosity, pore size and morphology. These open-cellular foams (pores: 200–500 μm) have exceptional characteristics...
Processing of biocompatible porous Ti and Mg (2001)
Wen, Cui`e, Mabuchi, M., Yamada, Y., Shimojima, K., Chino, Y., Asahina, T.
A new powder manufacturing process for Ti and Mg metallic foams designs porosity, pore size and morphology. These open-cellular foams (pores: 200–500 μm) have exceptional characteristics...
Imai, T., L'Esperance, G., Hong, B. D., Mabuchi, M., Tozawa, Y.
The relationship between high strain rate superplasticity (hsrs) and fabrication processing of beta-silicon nitride (si3n4) whisker reinforced aluminum alloy composite produced by powder metallurgy...
Mabuchi, M., Imal, T., Kubo, K., Higashi, K., Okada, Y.
This paper investigates a new procedure, containing hot extrusion, proposed to fabricate superplastic aluminum matrix composites reinforced with 20 vol % si3n4 whisker or particulate. the composites...
Mabuchi, M., Imal, T., Kubo, K., Higashi, K., Okada, Y.
Investigated in a constant strain rate tension test is the superplastic behavior in 20 vol % si3n4 particulate reinforced 6061al matrix composites, which were extruded. the particulate reinforced...
Mabuchi, M., Imai, T., Kubo, K., Higashi, K., Tanimura, S.
Al-zn-mg system alloy matrix composite reinforced with 20 vol% si3n4 whiskers has been extruded at 773k with a reduction ratio of 100:1, and its superplastic properties have been investigated at an...
Grain Refinement Processing for Superplastic Aluminum-Based Composites Reinforced With Si3N4. (1998)
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, dr mmc, mmc materials and material types:, (si3n4)p/2124,...
Mabuchi, M., Higashi, K., Tanimura, S., Imai, T., Kubo, K.
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, data, dr mmc, experimental, mmc, mmc data materials and material...
Superplastic Behavior at High Strain Rates in a Particulate Si3N4/6061 Aluminum Composite. (1998)
Mabuchi, M., Higashi, K., Okada, Y., Tanimura, S., Imai, T.
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, data, dr mmc, experimental, mmc, mmc data materials and material...
Very High Strain-Rate Superplasticity in a Particulate Si3N4/6061 Aluminum Composite. (1998)
Mabuchi, M., Higashi, K., Okada, Y., Tanimura, S., Imai, T.
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, data, dr mmc, experimental, mmc, mmc data materials and material...
Mabuchi, M., Higashi, K., Inoue, K., Tanimura, S., Imai, T.
The superplastic behavior of a powder metallurgy (si3n4)w/al-zn-mg composite was investigated under temperature conditions between 798 and 843 k and strain rates from 3x10-5 to 10 s-1 in a constant...
Partial Melting and Segregation Behavior in a Superplastic Si3N4/Al-Mg Alloy Composite. (1998)
Koike, J., Mabuchi, M., Higashi, K.
Al-mg alloy (5052) composite reinforced with si3n4 particulates was investigated by transmission electron microscopy and electron energy loss spectroscopy. partial melting was observed at...
Higashi, K., Nieh, T. G., Mabuchi, M., Wadsworth, J.
One of the major drawbacks of conventional superplastic forming is that the phenomenon is only found at relatively low strain rates. recent studies have demonstrated that superplasticity can in fact...
Mabuchi, M., Higashi, K., Langdon, T. G.
Elsevier Science Ltd. : Great Britain
PRODUCTION OF SUPERPLASTIC ALUMINIUM COMPOSITES REINFORCED WITH SI3N4 BY POWDER METALLURGY. (1998)
Mabuchi, M., Imai, T., Higashi, K.
Chapman and Hall : London, England
Mabuchi, M., Higashi, K., Wada, S.
Pergamon Press : New York
Mabuchi, M., Higashi, K., Inoue, K.
Pergamon Press : New York