M. Nadal

Publication List Details

Period

1989 - 2009

Number

15

Co-Authors

ABSTRACTS (2009)

Abdelwahab, A., Gardner, M., Parkash, R., Basta, M., Sapp, J., Veltmann, C., ...

Introduction: Scar-related ventricular tachycardia (VT) is often unmappable. Data regarding the outcomes of ablation for mappable vs unmappable VT are lacking. Methods: Catheter ablation of...

Influence of UV-B Radiation and Temperature on Photodegradation of PAHs: Preliminary Results (2006)

Nadal, M., Wargent, Jason J., Jones, Kevin C., Paul, Nigel D., Schuhmacher, M., Domingo, J. L.

The joint impact of UV-B radiation and temperature on photodegradation of polycyclic aromatic hydrocarbons (PAHs) sorbed to an organic solvent was assessed in this study. This approach was...

Optimization of the Deposition Conditions of Titanium Nitride from Ammonia and Titanium Tetrachloride (1995)

Nadal, M., Teyssandier, F.

TiN has been used in numerous technological applications including : cutting or milling tools and inserts, cold extrusion nozzles and punches, forming or stamping tools, and diffusion barrier. It is...

TiN-TixSiy Codeposits A.P.C.V.D. Produced Using the TiCl4-N2-SiH2Cl2-H2 System (1995)

Llauro, G., Bendeddouche, A., Nadal, M., Hillel, R.

Mixtures of TiNx, TiSi2 and Ti5Si3(N) were chemically vapour codeposited at atmospheric pressure using the TiCl4 - N2 - SiH2C12 - H2 system. Compact materials with very intimately dispersed phases...

Optimization of the Deposition Conditions of Titanium Nitride from Ammonia and Titanium Tetrachloride (1995)

Nadal, M., Teyssandier, F.

TiN has been used in numerous technological applications including : cutting or milling tools and inserts, cold extrusion nozzles and punches, forming or stamping tools, and diffusion barrier. It is...

TiN-TixSiy Codeposits A.P.C.V.D. Produced Using the TiCl4-N2-SiH2Cl2-H2 System (1995)

Llauro, G., Bendeddouche, A., Nadal, M., Hillel, R.

Mixtures of TiNx, TiSi2 and Ti5Si3(N) were chemically vapour codeposited at atmospheric pressure using the TiCl4 - N2 - SiH2C12 - H2 system. Compact materials with very intimately dispersed phases...

Titanium borides deposited by chemical vapor deposition thermodynamic calculation and experiments (1993)

Nadal, M., Grenet, T., Teyssandier, F.

The deposition conditions of titanium diboride and titanium monoboride were calculated under the thermodynamic equilibrium assumption and experimentally checked. The theoretical deposition diagram...

Titanium borides deposited by chemical vapor deposition thermodynamic calculation and experiments (1993)

Nadal, M., Grenet, T., Teyssandier, F.

The deposition conditions of titanium diboride and titanium monoboride were calculated under the thermodynamic equilibrium assumption and experimentally checked. The theoretical deposition diagram...

CHEMICAL VAPOR INFILTRATION OF 3D FIBROUS CARBON PREFORMS BY ZIRCONIUM CARBIDE (1991)

Nadal, M., Teyssandier, F.

The purpose of this paper is to study the infiltration efficiency of the process in the case of ZrC obtained from a ZrCl4-CH4-H2 initial gas mixture. 3D carbon preforms are infiltrated for 8 hours in...

CHEMICAL VAPOR INFILTRATION OF 3D FIBROUS CARBON PREFORMS BY ZIRCONIUM CARBIDE (1991)

Nadal, M., Teyssandier, F.

The purpose of this paper is to study the infiltration efficiency of the process in the case of ZrC obtained from a ZrCl4-CH4-H2 initial gas mixture. 3D carbon preforms are infiltrated for 8 hours in...

MECHANICAL RESPONSE AND RUPTURE MODES OF SiC/C CVD LAMELLAR COMPOSITES (1989)

Ignat, M., Nadal, M., Bernard, C., Ducarroir, M., Teyssandier, F.

SiC/C lamellar composites were prepared by CVD under reduced pressure. Three point bending tests were performed on samples with different lamellar thickness, in order to estimate their mechanical...

MECHANICAL RESPONSE AND RUPTURE MODES OF SiC/C CVD LAMELLAR COMPOSITES (1989)

Ignat, M., Nadal, M., Bernard, C., Ducarroir, M., Teyssandier, F.

SiC/C lamellar composites were prepared by CVD under reduced pressure. Three point bending tests were performed on samples with different lamellar thickness, in order to estimate their mechanical...