Masatoshi Sakairi

Effect of Potential, Temperature, and Fluoride Ions on the Repassivation Kinetics of Titanium in Phosphate Buffered Saline Solution with the Photon Rupture Method (2009)

Masatoshi Sakairi, Hiroomi Miyata, Tatsuya Kikuchi, Hideaki Takahashi

The effect of the applied potentials, temperature, and F− ions on the localized repassivation kinetics of titanium was investigated by the photon rupture method, PRM, and electrochemical...

Effect of Potential, Temperature, and Fluoride Ions on the Repassivation Kinetics of Titanium in Phosphate Buffered Saline Solution with the Photon Rupture Method (2009)

Masatoshi Sakairi, Hiroomi Miyata, Tatsuya Kikuchi, Hideaki Takahashi

The effect of the applied potentials, temperature, and F− ions on the localized repassivation kinetics of titanium was investigated by the photon rupture method, PRM, and electrochemical techniques...

無電解めっきとレーザー照射による有機樹脂板上へのCuマイクロパターン形成 (2008)

菊地, 竜也, 和智, 悠太, 坂入, 正敏, 高橋, 英明, 飯野, 潔, 片山, 直樹, ...

Printed circuit board with a Cu fine pattern was fabricated by electroless plating and laser irradiation. A glass fiber-reinforced epoxy resin plate was immersed in a Pd2+ containing solution, and...

無電解めっきと電気めっきによるセラミックス上への白金厚膜析出 (2008)

菊地, 竜也, 渡辺, 健, 坂入, 正敏, 高橋, 英明, 丸子, 智弘, Kikuchi, Tatsuya, ...

Thick platinum metal layer was deposited on ceramics using electroless- and electro-plating. The ceramics, which consist of ZrO2, Al2O3, SiO2, Na2O, and other oxides, were etched in HF solution, and...

Microfabrication of an anodic oxide film by anodizing laser-textured aluminium (2007)

Jha, Himendra, Kikuchi, Tatsuya, Sakairi, Masatoshi, Takahashi, Hideaki

A simple method for the fabrication of microstructures of an aluminium anodic oxide film (anodic alumina) by anodizing laser-textured aluminium is demonstrated. In the process, the aluminium...

Laser micromachining of porous anodic alumina film (2007)

Jha, Himendra, Kikuchi, Tatsuya, Sakairi, Masatoshi, Takahashi, Hideaki

A laser direct-write process on porous anodic alumina film is carried out for the fabrication of microstructure on the film, using nanosecond, second harmonic Nd:YAG laser. Laser micromachining can...

Area-selective microscale metallization on porous anodic oxide film of aluminium (2007)

Jha, Himendra, Kikuchi, Tatsuya, Sakairi, Masatoshi, Takahashi, Hideaki

A new method for micropatterning of metallic patterns on porous anodic oxide film of aluminium is described. The porous anodic oxide film was impregnated with organic dye and palladium ions before...

Area-selective microscale metallization on porous anodic oxide film of aluminium (2007)

Jha, Himendra, Kikuchi, Tatsuya, Sakairi, Masatoshi, Takahashi, Hideaki

A new method for micropatterning of metallic patterns on porous anodic oxide film of aluminium is described. The porous anodic oxide film was impregnated with organic dye and palladium ions before...

Development of three-electrode type micro-electrochemical reactor on anodized aluminum with photon rupture and electrochemistry (2007)

Sakairi, Masatoshi, Yamada, Masashi, Kikuchi, Tastuya, Takahashi, Hideaki

Photon rupture with a focused single pulse of pulsed YAG-laser irradiation was used to fabricate an aluminum electrochemical micro-reactor. Porous type anodic oxide film formed on aluminum specimens...

Development of three-electrode type micro-electrochemical reactor on anodized aluminum with photon rupture and electrochemistry (2007)

Sakairi, Masatoshi, Yamada, Masashi, Kikuchi, Tastuya, Takahashi, Hideaki

Photon rupture with a focused single pulse of pulsed YAG-laser irradiation was used to fabricate an aluminum electrochemical micro-reactor. Porous type anodic oxide film formed on aluminum specimens...

Initial stage of localized corrosion in artificial pits formed with photon rupture on Zn-5 mass% Al alloy-coated steel (2007)

Sakairi, Masatoshi, Uchida, Yoshiyuki, Takahashi, Hideaki

The photon rupture method, by which oxide film and metal are removed by focused pulsed Nd–YAG laser beam irradiation, was applied to form artificial micro-pits in Zn–5 mass% Al alloy-coated...

Initial stage of localized corrosion in artificial pits formed with photon rupture on Zn–5 mass% Al alloy-coated steel (2007)

Sakairi, Masatoshi, Uchida, Yoshiyuki, Takahashi, Hideaki

The photon rupture method, by which oxide film and metal are removed by focused pulsed Nd–YAG laser beam irradiation, was applied to form artificial micro-pits in Zn–5 mass% Al alloy-coated...

Electrochemical noise analysis of galvanic corrosion of anodized aluminum in chloride environments (2006)

Sakairi, Masatoshi, Shimoyama, Ukiya, Takahashi, Hideaki, 坂入, 正敏, 下山, 由起也, 高橋, 英明

A new type of electrochemical noise analysis technique with First Fourier Transformation, FFT, was applied to galvanic corrosion of barrier and porous type anodic oxide films formed on aluminum in...

Electrochemical noise analysis of galvanic corrosion of anodized aluminum in chloride environments (2006)

Sakairi, Masatoshi, Shimoyama, Ukiya, Takahashi, Hideaki

A new type of electrochemical noise analysis technique with First Fourier Transformation, FFT, was applied to galvanic corrosion of barrier and porous type anodic oxide films formed on aluminum in...

Electrochemical noise analysis of galvanic corrosion of anodized aluminum in chloride environments (2006)

Sakairi, Masatoshi, Shimoyama, Ukiya, Takahashi, Hideaki

A new type of electrochemical noise analysis technique with First Fourier Transformation, FFT, was applied to galvanic corrosion of barrier and porous type anodic oxide films formed on aluminum in...