Scientific Commons: P. D. Iedema

Modeling of branching density and branching distribution in low-density polyethylene polymerization (2008)

Low-density polyethylene (ldPE) is a general purpose polymer with various applications. By this reason, many publications can be found on the ldPE polymerization modeling. However, scission reaction...

Conditional Monte Carlo sampling to find branching architectures of polymers from radical polymerizations with transfer to polymer and recombination termination. (2007)

Iedema, P.D., Wulkow, M., Hoefsloot, H.C.J.

Conditional Monte Carlo sampling to find branching architectures of polymers from radical polymerizations with transfer to polymer and recombination termination (2007)

Iedema, P.D., Wulkow, M., Hoefsloot, H.C.J.

Conditional Monte Carlo sampling to find branching architectures of polymers from radical polymerizations with transfer to polymer and recombination termination. (2007)

Iedema, P.D., Wulkow, M., Hoefsloot, H.C.J.

Conditional Monte Carlo sampling to find branching architectures of polymers from radical polymerizations with transfer to polymer. (2006)

Iedema, P.D., Hoefsloot, H.C.J.

Modelling multi-viscosity systems with dissipative particle dynamics. (2006)

Visser, D.C., Hoefsloot, H.C.J., Iedema, P.D.

Poiseuille flow to measure the viscosity of particle model fluids. (2005)

Backer, J.A., Lowe, C.P., Hoefsloot, H.C.J., Iedema, P.D.

The most important property of a fluid is its viscosity, it determines the flow properties. If one simulates a fluid using a particle model, calculating the viscosity accurately is difficult because...

Computing the trivariate chain length/degree of branching/number of combination point distribution for radical polymerization with transfer to polymer and recombination termination. (2005)

Iedema, P.D., Hoefsloot, H.C.J.

Molecular architecture of ldPE (2005)

Iedema, P.D., Hoefsloot, H.C.J.

Combined length scales in dissipative particle dynamics (2005)

Backer, J.A., Lowe, C.P., Hoefsloot, H.C.J., Iedema, P.D.

Experimental validation of the explicit radical-particle size distribution approach for modeling emulsion polymerization: The seeded emulsion polymerization of styrene (2005)

Reynhout, X., Meuldijk, J., Drinkenburg, A.A.H., Iedema, P.D.

A novel method to model emulsion polymerization kinetics: The explicit radical-particle size distribution approach (2005)

Reynhout, X., Meuldijk, J., Drinkenburg, A.A.H., Iedema, P.D., Wulkow, M.

Design of recycle systems with parallel and consecutive reactions by nonlinear analysis (2005)

Kiss, A.A., Bildea, C.S., Dimian, A.C., Iedema, P.D.

Comprehensive boundary method for solid walls in dissipative particle dynamics. (2005)

Visser, D.C., Hoefsloot, H.C.J., Iedema, P.D.

Mathematical methods (2005)

Iedema, P.D., Kolhapure, N.H.

Mathematical methods (2005)

Iedema, P.D., Kolhapure, N.H.

State multiplicity in Reactor-Separator-Recycle systems with complex stoichiometry (2004)

Kiss, A.A., Bildea, C.S., Dimian, A.C., Iedema, P.D.

Design of tubular reactors in recycle systems (2004)

Bildea, C.S., Dimian, A.C., Cruz, S.C., Iedema, P.D.

The article presents an approach to design tubular reactors in recycle systems, based on non-linear analysis. A pseudohomogeneous plug-flow reactor model is used. It is assumed that the separation...

Determination of molecular weight and size distribution and branching characteristics of PVAc by means of size exclusion chromatography/multi-angle laser light scattering (SEC/MALLS) (2004)

Grcev, S., Schoenmakers, P.J., Iedema, P.D.

Molecular weight distribution in low-density polyethylene polymerization; impact of scission mechanisms in the case of a tubular reactor (2004)

Kim, D.M., Iedema, P.D.

The mechanism of cavitation-induced polymer scission; experimental and computational verification (2004)

Kuijpers, M.W.A., Iedema, P.D., Kemmere, M.F., Keurentjes, J.T.F.

Rheological characterization of computationally synthesized reactor populations of hyperbranched macromolecules: Bivariate seniority-priority distribution of ldPE (2004)

Iedema, P.D., Slot, J.J.M., Kim, D.M.

A conditional monte carlo method to predict branched architectures from MWD and branching of polyethylene for systems with a constrained geometry metallocene catalyst in continuous reactors (2004)

Iedema, P.D., Hoefsloot, H.C.J.

The role of polyradicals in predicting chain length distribution and gelation for radical polymerization with transfer to polymer (2004)

Iedema, P.D., Hoefsloot, H.C.J.

Molecular weight distribution modeling in low-density polyethylene polymerization; impact of scission mechanisms in the case of CSTR (2004)

Kim, D.M., Busch, M., Hoefsloot, H.C.J., Iedema, P.D.

Predicting the molecular weight distribution of polyethylene for mixed systems with a constrained-geometry metallocene catalyst in a semibatch reactor (2004)

Iedema, P.D., Hoefsloot, H.C.J., Smit, J.

On growth patterns of branched polymer architectures (2004)

Iedema, P.D., Hoefsloot, H.C.J.

A conditional Monte Carlo method to predict branched architectures from molecular weight and degree of branching distribution of polyethylene for single and mixed systems with a constrained geometry metallocene catalyst in continuous reactors (2004)

Iedema, P.D., Hoefsloot, H.C.J.

Any two polymer molecules of the same length (n) and the same number of branch points (N) can have different properties, since they may possess distinct architectures. In this paper we present...

Non-linear Behaviour of a PFR-Separator-recycle polymerisation systems (2003)

Kiss, A.A., Bildea, C.S., Dimian, A.C., Iedema, P.D.

A conditional Monte Carlo method to determine the architectures of metallocene catalysed polyethylene (2003)

Iedema, P.D., Hoefsloot, H.C.J.

Predicting Molecular Weight Distribution of Polyethylene for Mixed Systems with a Constrained Geometry Metallocene Catalyst in a Semi-Batch Reactor (2003)

Iedema, P.D., Hoefsloot, H.C.J.

Predicting Molecular Weight and Degree of Branching Distribution of Polyethylene for Mixed Systems with a Constrained Geometry Metallocene Catalyst in Semibatch and Continuous Reactors (2003)

Iedema, P.D., Hoefsloot, H.C.J.

State multiplicity of PFR-separator-recycle polymerization systems (2003)

Kiss, A.A., Bildea, C.S., Dimian, A.C., Iedema, P.D.

Molecular weight distribution modeling of radical polymerization in a CSTR with long chain branching through transfer to polymer and terminal double bond (TDB) propagation (2003)

Iedema, P.D., Grcev, S., Hoefsloot, H.C.J.