P. M. Kelly

Publication List Details

Period

1988 - 2007

Number

75

Co-Authors

A mechanism for the poisoning effect of silicon on the grain refinement of Al-Si alloys (2007)

Qiu, D., Taylor, J. A., Kelly, P. M.

The poisoning effect of excess Si solute on the grain-refining potency of Al-Ti-B grain refiners in Al-Si casting alloys has been studied in a crystallographic investigation. The edge-to-edge...

A mechanism for the poisoning effect of silicon on the grain refinement of Al-Si alloys (2007)

Qiu, D., Taylor, J.A., Kelly, P.M.

The poisoning effect of excess Si solute on the grain-refining potency of Al–Ti–B grain refiners in Al–Si casting alloys has been studied in a crystallographic investigation. The edge-to-edge...

A novel approach to the mechanism for the grain refining effect of melt superheating of Mg-Al alloys (2007)

Qiu, D., Taylor, J. A., Fu, H., Kelly, P. M.

The possible grain refining candidates for Mg-Al alloys that may occur in the superheating process have been systematically studied from a crystallographic perspective. The edge-to-edge matching...

A mechanism for the poisoning effect of silicon on the grain refinement of Al-Si alloys (2007)

Qiu, D., Taylor, J. A., Kelly, P. M.

The poisoning effect of excess Si solute on the grain-refining potency of Al-Ti-B grain refiners in Al-Si casting alloys has been studied in a crystallographic investigation. The edge-to-edge...

A novel approach to the mechanism for the grain refining effect of melt superheating of Mg-Al alloys (2007)

Qiu, D., Taylor, J. A., Fu, H., Kelly, P. M.

The possible grain refining candidates for Mg-Al alloys that may occur in the superheating process have been systematically studied from a crystallographic perspective. The edge-to-edge matching...

Application of edge-to-edge matching model to understand the in-plane texture of TiSi2 (C49) thin films on (001)(Si) surface (2006)

Zhang, M., Kelly, P. M.

The edge-to-edge matching model, which was originally developed for predicting crystallographic features in diffusional phase transformations in solids, has been used to understand the formation of...

Crystallography of carbide-free bainite in a hard bainitic steel (2006)

Zhang, M., Kelly, P. M.

The convergent beam Kikuchi line diffraction technique has been used to accurately determine the orientation relationships between bainitic ferrite and retained austenite in a hard bainitic steel. A...

Application of edge-to-edge matching model to understand the in-plane texture of TiSi2 (C49) thin films on (001)(Si) surface (2006)

Zhang, M., Kelly, P. M.

The edge-to-edge matching model, which was originally developed for predicting crystallographic features in diffusional phase transformations in solids, has been used to understand the formation of...

Crystallography of carbide-free bainite in a hard bainitic steel (2006)

Zhang, M., Kelly, P. M.

The convergent beam Kikuchi line diffraction technique has been used to accurately determine the orientation relationships between bainitic ferrite and retained austenite in a hard bainitic steel. A...

Edge-to-edge matching - The fundamentals (2006)

Kelly, P. M., Zhang, M. X.

The basis of the present authors' edge-to-edge matching model for understanding the crystallography of partially coherent precipitates is the minimization of the energy of the interface between the...

Edge-to-edge Matching and Its Applications (Part I) – Application to the simple HCP/BCC system (2005)

M-X Zhang, P M Kelly

Zhang and Kelly are the authors of the edge-to-edge matching model that significantly impacted the field of phase transformations because of its ability to predict crystallographic features and to be...

Edge-to-edge Matching and Its Applications (Part II) – Application to Mg-Al, Mg-Y and Mg-Mn alloys (2005)

M-X Zhang, P M Kelly

Under the support of an ARC DP project, the work further applied the edge-to-edge matching model to more complicated systems in real materials. It not only predicts all experimentally observed...

Crystallographic study of grain refinement in aluminium alloys using the edge-to-edge matching model (2005)

M-X Zhang, P M Kelly, M A Easton, J A Taylor

This jointly-authored paper arises from an ARC Discovery in which Taylor is a chief investigator. Zhang & Kelly’s edge-to-edge crystallographic model was applied to known grain refiners of...

Crystallography of grain refinement in Mg-Al based alloys (2005)

Zhang, M., Kelly, P. M., Qian, M., Taylor, J. A.

An edge-to-edge matching model has been used to analyze the crystallographic features between magnesium matrix and three commonly accepted heterogeneous nucleants for magnesium grains, Al4C3, Al2CO...

Edge-to-edge matching model for predicting orientation relationships and habit planes-the improvements (2005)

Zhang, M. X., Kelly, P. M.

The edge-to-edge matching model has been further developed along with the Cu/Cr system as an example. The conditions for zigzag atom rows to be matching directions are included and the critical value...

Crystallographic study of grain refinement in aluminum alloys using the edge-to-edge matching model (2005)

Zhang, M., Kelly, P. M., Easton, M., Taylor, J. A.

The edge-to-edge matching model for describing the interfacial crystallographic characteristics between two phases that are related by reproducible orientation relationships has been applied to the...

Comments on edge-to-edge matching and the equivalence of the invariant line, Delta g and Moire fringe approaches to the crystallographic features of precipitates (2005)

Kelly, P. M., Zhang, M. X.

Three apparently distinct and different approaches have been proposed to account for the crystallographic features of diffusion-controlled precipitation. These three models are based on (a) an...

Edge-to-edge matching and its applications - Part I. Application to the simple HCP/BCC system (2005)

Zhang, M. X., Kelly, P. M.

The edge-to-edge matching crystallographic model has been used to predict all the orientation relationships (OR) between crystals that have simple hexagonal close packed (HCP) and body-centered cubic...

Edge-to-edge matching and its applications - Part II. Application to Mg-Al, Mg-Y and Mg-Mn alloys (2005)

Zhang, M. X., Kelly, P. M.

A model for the crystallography and morphology of diffusion-controlled phase transformations - edge-to-edge matching - has been used to predict the orientation relationships (OR) and habit planes of...

Application of edge-to-edge matching model to grain refinement in Mg-Al based alloys (2005)

Zhang, M. X., Kelly, P. M., Qian, M., Taylor, J. A.

An edge-to-edge matching model has been used to analyze the crystallographic features between Mg matrix and three commonly accepted heterogeneous nucleants for Mg grains, Al4C3, Al2CO and Al-8(Mn,...

Crystallography of grain refinement in Mg-Al based alloys (2005)

Zhang, M., Kelly, P. M., Qian, M., Taylor, J. A.

An edge-to-edge matching model has been used to analyze the crystallographic features between magnesium matrix and three commonly accepted heterogeneous nucleants for magnesium grains, Al4C3, Al2CO...

Application of edge-to-edge matching model to grain refinement in Mg-Al based alloys (2005)

Zhang, M. X., Kelly, P. M., Qian, M., Taylor, J. A.

An edge-to-edge matching model has been used to analyze the crystallographic features between Mg matrix and three commonly accepted heterogeneous nucleants for Mg grains, Al4C3, Al2CO and Al-8(Mn,...

Edge-to-edge matching model for predicting orientation relationships and habit planes-the improvements (2005)

Zhang, M. X., Kelly, P. M.

The edge-to-edge matching model has been further developed along with the Cu/Cr system as an example. The conditions for zigzag atom rows to be matching directions are included and the critical value...

Crystallographic study of grain refinement in aluminum alloys using the edge-to-edge matching model (2005)

Zhang, M., Kelly, P. M., Easton, M., Taylor, J. A.

The edge-to-edge matching model for describing the interfacial crystallographic characteristics between two phases that are related by reproducible orientation relationships has been applied to the...

Comments on edge-to-edge matching and the equivalence of the invariant line, Delta g and Moire fringe approaches to the crystallographic features of precipitates (2005)

Kelly, P. M., Zhang, M. X.

Three apparently distinct and different approaches have been proposed to account for the crystallographic features of diffusion-controlled precipitation. These three models are based on (a) an...

Edge-to-edge matching and its applications - Part I. Application to the simple HCP/BCC system (2005)

Zhang, M. X., Kelly, P. M.

The edge-to-edge matching crystallographic model has been used to predict all the orientation relationships (OR) between crystals that have simple hexagonal close packed (HCP) and body-centered cubic...

Edge-to-edge matching and its applications - Part II. Application to Mg-Al, Mg-Y and Mg-Mn alloys (2005)

Zhang, M. X., Kelly, P. M.

A model for the crystallography and morphology of diffusion-controlled phase transformations - edge-to-edge matching - has been used to predict the orientation relationships (OR) and habit planes of...

The martensitic transformation in ceramics - its role in transformation toughening (2002)

Kelly, P. M., Francis Rose, L. R.

This paper reviews the current knowledge and understanding of martensitic transformations in ceramics - the tetragonal to monoclinic transformation in zirconia in particular. This martensitic...

Accurate orientation relationship between ferrite and austenite in low carbon martensite and granular bainite (2002)

Zhang, M. X., Kelly, P. M.

Convergent beam Kikuchi diffraction was used to accurately determine the orientation relationships (ORs) between austenite and martensite, and between austenite and granular bainite in two Fe-Ni-Mn-C...

Further study of the model for stress-induced martensitic transformation in Fe-Ni-C alloy and white cast iron (2002)

Zhang, M., Kelly, P. M.

A model for stress-induced martensitic transformation, which was successfully used in an Fe-Ni-C alloy in compression conditions, has been further studied and extended to investigate the...

Accurate orientation relationship between ferrite and austenite in low carbon martensite and granular bainite (2002)

Zhang, M. X., Kelly, P. M.

Convergent beam Kikuchi diffraction was used to accurately determine the orientation relationships (ORs) between austenite and martensite, and between austenite and granular bainite in two Fe-Ni-Mn-C...

Further study of the model for stress-induced martensitic transformation in Fe-Ni-C alloy and white cast iron (2002)

Zhang, M., Kelly, P. M.

A model for stress-induced martensitic transformation, which was successfully used in an Fe-Ni-C alloy in compression conditions, has been further studied and extended to investigate the...

Stress-induced Martensitic Transformation and Impact Toughness of Cast Irons and High-carbon Fe-Ni-C Steel (2001)

M-X Zhang, P M Kelly

The work is part of an ARC DP project. It describes the relationship between impact toughness and stress-induced martensitic transformations. Based on a crystallographic model for stress-induced...

The effect of heat treatment on the toughness, hardness and microstructure of low carbon white cast irons (2001)

M-X Zhang, P M Kelly, J D Gates

Work funded by ARC Large Grant to Kelly and Gates; Zhang performed the experiments and wrote the paper. Follows work by Hann & Gates (J.Mater.Sci. 1997, 32, 1249-1259) demonstrating that...

A model of stress induced martensitic transformation in Fe-Ni-C alloy (1999)

Zhang, M. X., Kelly, P. M., Gates, J. D.

A model for the stress induced martensitic transformation in zirconia ceramics was refined and extended to investigate the process of stress induced martensitic transformation in an Fe-Ni-C alloy in...

A model of stress induced martensitic transformation in Fe-Ni-C alloy (1999)

Zhang, M. X., Kelly, P. M., Gates, J. D.

A model for the stress induced martensitic transformation in zirconia ceramics was refined and extended to investigate the process of stress induced martensitic transformation in an Fe-Ni-C alloy in...

CANDID: Comparison algorithm for navigating digital image databases (1994)

P. M. Kelly, T. M. Cannon

In this paper,wepropose a method forcalculating the similarity between two digital images. A global signature describing the texture, shape, or color content is rst computed for every image stored in...

CANDID: Comparison Algorithm for Navigating Digital Image Databases (1994)

P. M. Kelly, T. M. Cannon

In this paper, we propose a method for calculating the similarity between two digital images. A global signature describing the texture, shape, or color content is first computed for every image...

North winds and production in the eastern North Atlantic (1988)

Dickson, R.R., Kelly, P.M., Colebrook, J.M., Wooster, W.S., Cushing, D.H.

A long-term increase in northerly wind componentl over the eastern North Atlantic and European Seaboard between 1950 and 1980 is associated both with a decline of phytoplankton and zooplankton...

Local problems, local solutions: improving tuberculosis control at the district level in Malawi.

Kelly, P. M.

OBJECTIVE: To examine the causes of a low cure rate at the district level of a tuberculosis (TB) control programme and to formulate, implement, and evaluate an intervention to improve the situation....

Macrophages in human breast disease: a quantitative immunohistochemical study.

Kelly, P. M., Davison, R. S., Bliss, E., McGee, J. O.

We describe a quantitative histological study of 34 breast biopsies using a marker for human macrophages, the monoclonal antibody EBM/11. Seventeen of the biopsies were of malignant tumours. Both...