RIT Undergraduate Symposium 2008 (2008)
Braganza, Andrea, Souza, Amanda, Birdsall, Laura, Stevens, Eric, Newman, Dina, Razali, Ayman, ...
The Undergraduate Research Symposium was founded to honor student achievement in scientific research and to further RIT's goal of combining traditional laboratory work and classroom instruction with...
RIT Research Programs 2007 Annual Report (2007)
Boyd, Donald, Kandlikar, Satish, Borkholder, David, Fairchild, Mark, DiFonzo, Nicholas, Figer, Donald, ...
Faculty Research and Scholarship
Numerical study of an evaporating meniscus on a moving heated surface (2006)
Kandlikar, Satish, Mukherjee, A.
The present study is performed to numerically analyze an evaporating meniscus bounded between the advancing and receding interfaces on a moving heated surface. The numerical scheme developed for...
Review of fabrication of nanochannels for single phase liquid flow (2006)
Abstract The topic of single phase liquid flow in submicron or nanochannels is a nascent field. There have only been a couple papers that have dealt with this area directly. The most probable reason...
Steinke, Mark, Kandlikar, Satish, Magerlein, J., Colgan, Evan, Raisanen, Alan
An experimental facility has been developed to investigate single-phase liquid heat transfer and pressure drop in a variety of microchannel geometries. The facility is capable of accurately measuring...
Kandlikar, Satish, Kuan, Wai Keat, Willistein, Daniel, Borrelli, John
Heat transfer during flow boiling in minichannels and microchannels is intimately linked to the liquid-vapor phase distribution in the channels. The vapor phase exists as nucleating bubbles,...
Heat transfer during flow boiling in minichannels and microchannels is intimately linked to the liquid-vapor phase distribution in the channels. The vapor phase exists as nucleating bubbles,...
Nucleation characteristics and stability considerations (2006)
Flow boiling in microchannels and minichannels has received considerable attention in the past decade. The interest stems from the possibility of achieving the extremely high heat fluxes, over 1...
Heat transfer during flow boiling in minichannels and microchannels is intimately linked to the liquid-vapor phase distribution in the channels. The vapor phase exists as nucleating bubbles,...
Numerical simulation of flow through microchannels with designed roughness (2006)
Rawool, A., Mitra, S., Kandlikar, Satish
A three-dimensional numerical simulation of flow through serpentine microchannels with designed roughness in form of obstructions placed along the channels walls is conducted here. CFD-ACE + is used...
Review of fabrication of nanochannels for single phase liquid flow (2005)
Perry, Jeffrey, Kandlikar, Satish
2005 proceedings of the 3rd international conference on microchannels and minichannels. The original publication is available at www.springerlink.com .
Kandlikar, Satish, Schmitt, Derek, Carrano, Andres, Taylor, James
Roughness features on the walls of a channel wall affect the pressure drop of a fluid flowing through that channel. This roughness effect can be described by (i) flow area constriction and (ii)...
RIT Research Programs 2005 Annual Report (2005)
Raffaelle, Ryne, Phelps, Andrew, Nasr, Nabil, Winebrake, James, Kastner, Joel, Newman, Dina, ...
Faculty Research and Scholarship
Balasubramanian, Prabhu, Kandlikar, Satish
Microchannels and minichannels are being considered for high heat flux applications under microgravity environment in space missions. An experimental study is undertaken to determine the effect of...
Numerical simulation of flow through microchannels in bipolar plate (2005)
Rawool, A., Mitra, S., Agrawal, A., Kandlikar, Satish
Third international conference on microchannels and minichannels, June 13-15, 2005. The entire article is available at: http://www.asme.org/ .
Kandlikar, Satish, Willistein, Daniel, Borrelli, John
Third international conference on microchannels and minichannels, June 13-15, 2005. The complete proceeding is available at www.asme.org .
Mukherjee, Abhijit, Kandlikar, Satish
Third international conference on microchannels and minichannels, June 13-15, 2005. The complete proceedings are available at www.asme.org .
Borrelli, John, Kandlikar, Satish, Trabold, Thomas, Owejan, Jon
Third international conference on microchannels and minichannels, June 13-15, 2005. The complete proceedings are available at www.asme.org .
Single-phase liquid heat transfer in microchannels (2005)
Steinke, Mark, Kandlikar, Satish
Third international conference in microchannels and minichannels, June 13-15, 2005. The complete proceedings can be obtained at www.asme.org .
Single-phase liquid friction factors in microchannels (2005)
Steinke, Mark, Kandlikar, Satish
Third international conference on microchannels and minichannels, June 13-15, 2005. The complete proceedings can be obtained at www.asme.org .
Effects of repeating microstructures on pressure drop in rectangular minichannels (2005)
Schmitt, Derek, Kandlikar, Satish
Proceedings of the third international conference on microchannels and minichannels June 13-15, 2005. The complete proceedings can be obtained at www.asme.org .
Review of fabrication of nanochannels for single phase liquid flow (2005)
Perry, Jeffrey, Kandlikar, Satish
Proceedings of the third international conference on microchannels and minichannels, June 13-15, 2005. The complete proceedings can be obtained at www.asme.org .
High flux heat removal with microchannels - A roadmap of challenges and opportunities (2005)
Proceedings of the third international conference on microchannels and minichannels, June 13-15, 2005. The complete proceedings can be obtained at www.asme.org .
Taylor, James, Carrano, Andres, Kandlikar, Satish
Proceedings of the third international conference on microchannels and minichannels, June 13-15, 2005. The complete proceedings can be found at www.asme.org .
Steinke, Mark, Kandlikar, Satish, Magerlein, J., Colgan, Evan, Raisanen, Alan
Proceedings of the third international conference on microchannels and minichannels, June 13-15, 2005. The complete proceedings can be obtained at www.asme.org .
Mukherjee, A., Kandlikar, Satish
The present study is performed to numerically analyze the growth of a vapor bubble during flow of water through a microchannel. The complete Navier- Stokes equations, along with continuity and energy...
Experimental study of heat transfer in an evaporating meniscus on a moving heated surface (2005)
Kandlikar, Satish, Kuan, Wai Keat, Mukherjee, A.
A stable meniscus is formed by a circular nozzle dispensing water over a heated circular face of a rotating cylindrical copper block. The nozzle is offset from the axis of rotation of the copper...
Bergles, A., Kandlikar, Satish
The critical heat flux (CHF) limit is an important consideration in the design of most flow boiling systems. Before the use of microchannels under saturated flow boiling conditions becomes widely...
On the nature of critical heat flux in microchannels (2005)
Bergles, A., Kandlikar, Satish
The critical heat flux (CHF) limit is an important consideration in the design of most flow boiling systems. Before the use of microchannels under saturated flow boiling conditions becomes widely...
Numerical simulation of flow through microchannels with designed roughness (2005)
Rawool, A., Mitra, Sushanta, Kandlikar, Satish
A three-dimensional numerical simulation of flow through serpentine microchannels with designed roughness in form of obstructions placed along the channels walls is conducted here. CFD-ACE+ is used...
High flux heat removal with microchannels — A Roadmap of challenges and opportunities (2005)
Article from Heat Transfer Engineering, published by Taylor & Francis. The complete article is available at http://www.taylorandfrancisgroup.com/ .
Balasubramanian, Prabhu, Kandlikar, Satish
Heat Transfer Engineering article published by Taylor & Francis. The complete article can be found at: http://www.taylorandfrancisgroup.com/ .
Kandlikar, Satish, Steinke, Mark
Microchannels are being considered in many advanced heat transfer applications including automotive and stationary fuel cells as well as electronics cooling. However, there are a number of...
Numerical study of an evaporating meniscus on a moving heated surface (2004)
Mukherjee, Abhijit, Kandlikar, Satish
ASME heat transfer/fluids engineering summer conference, July 11-15, 2004. The complete proceedings can be obtained at www.asme.org .
Single-phase heat transfer enhancement techniques in microchannel and minichannel flows (2004)
Steinke, Mark, Kandlikar, Satish
Proceedings of the second international conference on microchannels and minichannels, June 17-19, 2004. The complete proceedings can be obtained at www.asme.org .
Mukherjee, Abhijit, Kandlikar, Satish
Proceedings of the second international conference on microchannels and minichannels, June 17-19, 2004. The complete proceedings can be obtained at www.asme.org .
Kandlikar, Satish, Grande, William
Proceedings of the second international conference on microchannels and minichannels, June 17-19, 2004. The complete proceedings can be obtained at www.asme.org .
Kandlikar, Satish, Balasubramanian, Prabhu
Proceedings of the second international conference on microchannels and minichannels, June 17-19, 2004. The complete proceedings can be found at www.asme.org .
Upadhye, Harshal, Kandlikar, Satish
Proceedings of the second international conference on microchannels and minichannels, June 17-19, 2004. The complete proceedings can be found at www.asme.org .
Campbell, Levi, Kandlikar, Satish
Proceedings of the second international conference on microchannels and minichannels, June 17-19, 2004. The complete proceedings can be found at www.asme.org .
Campbell, Levi, Kandlikar, Satish
Proceedings of the second international conference on microchannels and minichannels, June 17-19, 2004. The complete proceedings can be found at www.asme.org .
Balasubramanian, Prabhu, Kandlikar, Satish
Proceedings of the second international conference on microchannels and minichannels, June 17-19, 2004. The complete proceedings can be obtained at www.asme.org .
Heat transfer mechanisms during flow boiling in microchannels (2004)
The forces due to surface tension and momentum change during evaporation, in conjunction with the forces due to viscous shear and inertia, govern the two-phase flow patterns and the heat transfer...
Kandlikar, Satish, Grande, William
Journal of Heat Transfer Engineering article published by Taylor & Francis. The complete article can be found at: http://www.tandf.co.uk/journals/ .
Kandlikar, Satish, Balasubramanian, Prabhu
Journal of Heat Transfer Engineering article. The complete article is available at: http://www.tandf.co.uk/journals/ .
Thermal management of a polyimide v-groove leg actuator for a walking micro-robot (2003)
Raisanen, Alan, Sahin, Ferat, Khire, Ritesh, Kandlikar, Satish, Walter, Wayne
IMECE 2003 ASME international mechanical engineering congress & exposition proceedings. Please see www.asme.org for more information.
Heat transfer from a moving and evaporating meniscus on a heated surface (2003)
Proceedings of the summer heat transfer conference, July 21-23, 2003. The complete proceedings fan be found at www.asme.org .
Balasubramanian, Prabhu, Kandlikar, Satish
Proceedings from the summer heat transfer conference, July 21-23, 2003. The complete proceedings can be found at www.asme.org .
An Experimental investigation on flow boiling of ethylene-glycol / water mixtures (2003)
Mixtures of ethylene glycol and water are used in cooling the engines in automotive applications. Heat is transferred essentially under subcooled flow boiling conditions as the mixture flows over the...
Flow boiling and pressure drop in parallel flow microchannels (2003)
Steinke, Mark, Kandlikar, Satish
Proceedings of 1st international conference on minichannels and microchannels, April 24-25, 2003. The complete proceedings can be found at www.asme.org .
Examples of microchannel mass transfer processes in biological systems (2003)
Kandlikar, Satish, Steinke, Mark
Proceedings of first international conference on minichannels and microchannels, April 24-25, 2003. The complete proceedings can be found at www.asme.org .
Kandlikar, Satish, Balasubramanian, Prabhu
Proceedings from the first international conference on microchannels and minichannels, April 24-25, 2003. The complete proceedings can be found at www.asme.org .
Critical heat flux in microchannels: Experimental issues and guidelines for measurement (2003)
Bergles, A., Kandlikar, Satish
Proceedings from the first international conference on microchanels and minichannels, April 24-25, 2003. The complete proceedings can be found at www.asme.org .
Heat transfer mechanisms during flow boiling in microchannels (2003)
Proceedings from the first international conference on microchannels and minichannels, April 24-25, 2003. The complete proceedings can be found at www.asme.org .
Proceedings from the first international conference on microchannels and minichannels, April 24-25, 2003. The complete proceedings can be found at www.asme.org .
Kandlikar, Satish, Grande, William
Journal of Heat Transfer Engineering article. Published by Taylor & Francis. http://www.taylorandfrancis.com/
Microchannels-Short history and bright future (2003)
Heat Transfer Engineering article. Published by Taylor & Francis. http://www.taylorandfrancis.com/
Predicting heat transfer during flow boiling in minichannels and microchannels (2003)
Kandlikar, Satish, Steinke, Mark
American Society of Heating, Refrigerating and Air-Conditioning Engineers article.
Kandlikar, Satish, Joshi, Shailesh, Tian, Shurong
Journal of Heat Transfer Engineering article. The full article is available at: http://www.tandf.co.uk/journals/ .
Leaders in thermal evolution - heat transfer research laboratories in academic institutions (2003)
Journal of Heat Transfer Engineering article. The full article is available at: http://www.tandf.co.uk/journals/ .
Kandlikar, Satish, Grande, William
Journal of heat transfer engineering conference proceeding. Published by Taylor & Francis.
Journal of heat and transfer engineering article. The complete version can be found at the Taylor & Francis website; http://www.tandf.co.uk/journals/ .
Effect of entrance condition on frictional losses and transition to turbulence (2002)
Kandlikar, Satish, Campbell, Levi
Proceedings at the international mechanical engineering conference and exposition, November 17-21, 2002. The complete proceedings can be found at www.asme.org .
Fundamental issues related to flow boiling in minichannels and microchannels (2002)
Experimental thermal and fluid science journal article. Please see http://www.elsevier.com/ for more information.
Kandlikar, Satish, Steinke, Mark, Singh, Ashish
Thirty-fifth proceedings of national heat transfer conference, June, 2001. The complete proceedings can be found at www.asme.org .
Steinke, Mark, Kandlikar, Satish
First proceedings of the international conference on heat transfer, fluid mechanics, and thermodynamics, April 8-10, 2002. The complete proceedings can be found at www.asme.org .
Contact angles and interface behavior during rapid evaporation of liquid on a heated surface (2002)
Kandlikar, Satish, Steinke, Mark
International journal of heat and transfer article. Published by Elsevier; http://www.elsevier.com/ .
Fundamental issues related to flow boiling in minichannels and microchannels (2002)
Flow boiling in small hydraulic diameter channels is becoming increasingly important in many diverse applications. The previous studies addressing the effects of the channel size on the flow...
A theoretical model is developed to describe the hydrodynamic behavior of the vapor liquid interface of a bubble at the heater surface leading to the initiation of critical heat flux (CHF) condition....
Journal of heat transfer engineering article. The complete article can be found at http://www.tandf.co.uk/journals/ .
Kandlikar, Satish, Maruyama, Shigeo, Steinke, Mark, Kimura, Tatsuto
Proceedings of the international mechanical engineering congress and exposition, November 11-16, 2001. The complete proceedings can be found at www.asme.org .
ASME IMECE conference paper, presented November 11-16, 2001. The complete paper is available at www.asme.org .
High-Speed photographic observation of flow boiling of water in parallel mini-channels (2001)
Kandlikar, Satish, Steinke, Mark, Tian, Shurong, Campbell, Levi
Thirty-fifth proceedings of national heat transfer conference, June 10-12, 2001. The complete proceedings can be found at www.asme.org .
High-speed photographic observation of flow boiling of water in parallel mini-channels (2001)
Kandlikar, Satish, Steinke, Mark, Tian, Shurong, Campbell, Levi
Thirty-fifth proceedings of national heat transfer conference, June 10-12, 2001. The complete proceedings is available at www.asme.org .
Kandlikar, Satish, Joshi, Shailesh, Tian, Shurong
Conference proceedings of the ASME national heat transfer conference, June 10-12, 2001. The complete proceedings can be found at www.asme.org .
Contact angles of droplets during spread and recoil after impinging on a heated surface (2001)
Kandlikar, Satish, Steinke, Mark
Chemical engineering research and design article. Please go to www.elsevier.com for more information.
Multiphase Science and Technology article. The full article is published by Begell House Inc. and available at: http://www.begellhouse.com/ .
Contact angles of droplets during spread and recoil after impinging on a heated surface (2001)
Kandlikar, Satish, Steinke, Mark
Chemical Engineering Research and Design article. Published by Elsevier and available at: http://www.elsevier.com .
Flow boiling heat transfer with binary and ternary mixtures in microfin tubes (2000)
Inoue, Nirihiro, Goto, Asso, Kandlikar, Satish
ASME IMECE 2000 conference proceedings. The complete conference proceedings can be found at www.asme.org .
ASME national heat transfer conference proceeding. Please go to www.asme.org for the complete proceedings.
Pool boiling heat transfer with dilute binary mixtures introduces two additional effects due to binary diffusion, and due to change in the surface tension. The secondary effects due to changes in...
Effect of surface finish on flow boiling heat transfer (1998)
Kandlikar, Satish, Spiesman, Paul
Paper presented at the ASME IMECE98 meeting, November 15-20, 1998. Please go to www.asme.org for the complete paper.
Subcooled flow boiling covers the region beginning from the location where the wall temperature exceeds the local liquid saturation temperature to the local where the thermodynamics quality reaches...
Boiling heat transfer with binary mixtures: Part I— A theoretical model for pool boiling (1998)
Experimental evidence available in the literature indicates that the pool boiling heat transfer with binary mixtures is lower than the respective mole- or mass-fraction averaged value. Although a few...
Boiling heat transfer with binary mixtures: Part II — Flow boiling in plain tubes (1998)
Flow boiling heat transfer with pure fluids comprises convective and nucleate boiling components. In flow boiling of binary mixtures, in addition to the suppression effects present in pool boiling,...
Bubble nucleation and growth characteristics in subcooled flow boiling of water (1997)
Kandlikar, Satish, Mizo, Viktor, Cartwright, Michael, Ikenze, Emeka
Proceedings of the thirty-second national heat transfer conference. Please see www.asme.org for the complete proceedings.
Transient response of heat exchangers (1995)
Conference proceedings of the second ISHMT - ASME heat and mass transfer conference, December 28-31, 1995. Please go to www.asme.org for the complete proceedings.
Journal of Heat Transfer article published by the American Society of Mechanical Engineers.
Kandlikar, Satish, Mizo, Viktor, Cartwright, Michael
Convective flow boiling international conference, April 30-May 5, 1995. Published by Taylor & Francis. The complete proceeding can be found at: http://www.taylorandfrancis.com/
A photographic study of nucleation characteristics of cavities in flow boiling (1995)
Kandlikar, Satish, Cartwright, Michael, Mizo, Viktor
Proceedings of the international conference on convective flow boiling. Published by Taylor & Francis. The complete proceedings can be found at: http://www.taylorandfrancis.com/
Proceedings of the engineering foundation conference, March 22-27, 1992.
A Model for correlating flow boiling heat transfer in augmented tubes and compact evaporators (1991)
Kandlikar, Satish, Pisera, J., Kytomaa, H., Thome, R.
Proceedings at the conference on experimental heat transfer, fluid mechanics and thermodynamics, August 1991. Please see http://www.elsevier.com for more information.
The thermal behavior of a flow boiling system is represented by a flow boiling map to illustrate visually the relationships among various system parameters. An earlier flow boiling map Collier (1981)...
Correlating heat transfer data in binary systems (1991)
Proceedings from the national heat transfer conference, July 1991. Please go to www.asme.org for the complete proceedings.
A Model for flow boiling heat transfer in augmented tubes and compact evaporators (1990)
ASME winter annual meeting proceedings, November 25-30, 1990. Please see www.ASME.org for the complete proceedings.
A Mechanistic model for flow boiling heat transfer (1990)
Proceedings of the winter annual ASME meeting, November 1990. Please see www.asme.org for the complete proceedings.
Flow boiling maps for water, R-22 and R-134a in the saturated region (1990)
Proceedings of the 9th international heat transfer conference, August 1990.
A simple correlation was developed earlier by Kandlikar (1983) for predicting saturated flow boiling heat transfer coefficients inside horizontal and vertical tubes. It was based on a model utilizing...
Instabilities in an R-11 thermosiphon loop with applications in microelectronic chip cooling (1989)
Kandlikar, Satish, Habsberg, Sandor
Proceedings from the ASME annual winter meeting, December 1989. Please go to www.ASME.org for the complete proceedings.
Asymptotic effectlveness-NTU formulas for multipass plate heat exchangers (1989)
Journal of Heat Transfer article. The full article is published by the American Society of Mechanical Engineers and is available at: http://www.asme.org/ .
Journal of Heat Transfer article. Published by the American Society of Mechanical Engineers and available at: http://www.asme.org/ .
Asymptotic effectiveness – NTU formulas for multipass plate heat exchangers (1989)
Kandlikar, Satish, Shah, Ramesh
Journal of heat transfer proceedings published by ASME. Please see www.ASME.org for the complete proceedings.
Journal of heat transfer proceedings. Please see www.ASME.org for the complete proceedings.
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) article.
Sukhatme, S., Kandlikar, Satish
The thermal conductivity of an insulation material varies parabolically with the rise in temperature. Therefore, to get the appropriate value of the thermal conductiv9ity of a material by the guarded...
Predicting the thermodynamic properties of superheated vapor mixtures of R-22 and R-12 (1977)
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) article.
Predicting the properties of mixtures of R22 and R12 part II - Transport properties (1975)
Kandlikar, Satish, Bijlani, C., Sukhatme, S.
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) article.
Predicting the properties of mixtures of R22 and R12 part I - Thermodynamic properties (1975)
Kandlikar, Satish, Bijlani, C., Sukhatme, S.
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) article.