Ochiai, Shojiro, Okuda, H., Matsubayashi, H., Mukai, Y., Shin, J.K., Iwamoto, S., ...
A prediction method of the critical current-bending strain relation of the Bi2223 composite tape, which was bent at room temperature and cooled down to 77 K for measurement of critical current, was...
Matsubayashi, H., Mukai, Y., Arai, T., Shin, J.K., Ochiai, Shojiro, Okuda, H., ...
It has been reported that, when the (Bi,Pb)2Sr2Ca2Cu3Ox (hereafter noted as BSCCO)/Ag/Ag-alloy tape is laminated with stainless steel, the tensile strain tolerance of critical current is much...
Anomalous small-angle scattering from nanoquasicrystalline precipitates in Zr80Pt20 ribbons (2008)
Okuda, Hiroshi, Fukumoto, Takefumi, Saida, Junji, Ochiai, Shojiro, Sasaki, Sono, Masunaga, Hiroyasu
Point-focusing monochromator crystal realized by hot plastic deformation of a Ge wafer (2008)
Okuda, Hiroshi, Nakajima, Kazuo, Fujiwara, Kozo, Morishita, Kohei, Ochiai, Shojiro
Okuda, Hiroshi, Shin, Jae-Kyong, Iwamoto, Sohei, Morishita, Kohei, Mukai, Yasuhiro, Matsubayashi, Hiroshi, ...
Osamura, Kozo, Sugano, Michinaka, Machiya, Shutaro, Adachi, Hiroki, Sato, Masugu, Ochiai, Shojiro, ...
Morishita, Kohei, Matsumoto, Tasuku, Ochiai, Shojiro, Okuda, Hiroshi, Ishikawa, Toshihiro, Sato, Mitsuhiko
Ochiai, Shojiro, Fujimoto, Masahiro, Okuda, Hiroshi, Sugano, Michinaka, Hojo, Masaki, Osamura, Kozo, ...
Effects of Interface on Strength of Metal Matrix Composites. (1998)
Ochiai, Shojiro, Osamura, Kozo
In order to predict effects of interfacial bonding strength and interfacial chemical reaction on tensile strength of fiber-reinforced metal matrix composites, modelling study mainly by means of a...
Matsunaga, Kenji, Ochiai, Shojiro, Osamura, Kozo, Waku, Yoshiharu, Yamamura, Takemi
An investigation was done on the tensile strength of the unidirectional si-ti-c-o fiber (tyranno fiber) reinforced aluminum matrix composite which was produced by a squeeze casting method. the...
Monte-Carlo Simulation on Notched Strength of Unidirectional Boron-Aluminium Composites. (1998)
Ochiai, Shojiro, Osamura, Kozo
A monte-carlo simulation was carried out on the fracture behaviour of centre-notched unidirectional boron-aluminum composites assuming quasi self-similar notch extension. the main results obtained in...
Ochiai, Shojiro, Osamura, Kozo
The tensile behavior and strength of metal matrix composites reinforced with surface-damaged fibers was studied by means of the computer simulation technique. the simulation experiments were carried...
A Computer Simulation on Tensile Strength of Surface-Damaged Fibers. (1998)
Ochiai, Shojiro, Osamura, Kozo
The strength of surface-damaged fibers was studied by means of a computer simulation experiment based on the monte-carlo method using a simple model which assumes that the surface flaws can be...
Ochiai, Shojiro, Osamura, Kozo
A two-dimensional computer simulation method was used to investigate the deformation and fracture behavior of fiber-reinforced metal. the simulation was done for various combinations of distributions...
Ochiai, Shojiro, Osamura, Kozo, Uehara, Toshihiro
Structure and its relation to fracture behavior of multi-filamentary nb(sub 3)sn superconducting composite materials prepared by the bronze method were studied by tensile testing at room temperature....
Ochiai, Shojiro, Irie, Yoshitomo, Osamura, Kozo, Murakami, Yotaro
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, cr mmc, experimental, mmc materials and material types:, al...
Ochiai, Shojiro, Osamura, Kozo, Murakami, Yotaro
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, cr mmc, data, experimental, mmc, mmc data materials and material...
Stress Distribution of a Segmented Fibre in Loaded Single Fibre-Metal Matrix Composites. (1998)
Ochiai, Shojiro, Osamura, Kozo
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, mmc, composite materials, theoretical materials and material...
Multiple Fracture of a Fibre in a Single Tungsten Fibre-Copper Matrix Composite. (1998)
Ochiai, Shojiro, Osamura, Kozo
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, cr mmc, data, experimental, mmc, mmc data, statistics (see also...
Ochiai, Shojiro, Osamura, Kozo
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, cr mmc, mmc, analytical materials and material types:, fibers...
Ochiai, Shojiro, Osamura, Kozo
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, cr mmc, mmc, models, predictions materials and material types:,...
Ochiai, Shojiro, Osamura, Kozo, Murakami, Yotaro
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, cr mmc, mmc materials and material types:, (b)f/al, (b)f/ti, al...
Ochiai, Shojiro, Osamura, Kozo, Abe, Kengo
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, cr mmc, analytical, data, mmc, mmc data, theoretical, materials...
Matsunaga, Kenji, Ochiai, Shojiro, Osamura, Kozo, Waku, Yoshiharu, Yamamura, Takemi
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, data, experimental, mmc, mmc data materials and material types:,...
Stress Concentration at a Notch Tip in Unidirectional Metal Matrix Composites. (1998)
Ochiai, Shojiro, Osamura, Kozo, Tokinori, Kenji, Nakatani, Mitsuhisa, Yamatsuta, Koji
A method to calculate static stress concentration factors in the fibers at the tip of a rectangular notch in unidirectional mmc was presented based on the shear lag analysis for a 2-d model. by using...
Ochiai, Shojiro, Osamura, Kozo
How bonding strength and chemical reaction at interface between fiber and matrix affect on fracture behaviour and strength of unidirectional metal matrix composites were shown in view of fundamental...
Influence of Fracture of Coating Layer on Fiber Strength. (1998)
Ochiai, Shojiro, Osamura, Kozo, Honjo, Kuniaki
When a circumferential notch is formed on a fiber surface owing to premature fracture of the coating layer, the fiber strength is reduced. in order to describe the fracture strength of the fiber in...
Stress Distribution in Discontinuous Fibres in a Model Composite. (1998)
In order to calculate stress distribution in unidirectional discontinuous fibres embedded in a metal matrix, a method based on the shear-lag analysis was proposed. using this method, the influence of...
Ochiai, Shojiro, Matsunaga, Kenji, Waku, Yoshiharu, Tamamura, Takemi, Hojo, Masaki
The mechanism for the temperature dependence of the tensile strength of unidirectional hybrid type si-ti-c-o (tyranno) fiber reinforced aluminum matrix composite, in which sic-particles are dispersed...
Strength of Unnotched Composites. (1998)
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, cr mmc, data, mmc, mmc data, review materials and material...
Influence of Fracture of Coating Layer on Fiber Strength. (1998)
Ochiai, Shojiro, Osamura, Kozo, Honjo, Kuniaki
When a circumferential notch is formed on a fiber surface owing to premature fracture of the coating layer, the fiber strength is reduced. In order to describe the fracture strength of the fiber for...
Ochiai, Shojiro, Osamura, Kozo
Verlag von Gebruder Borntraeger : Leipzig
Kyoto University (京都大学)
Point-focusing monochromator crystal realized by hot plastic deformation of a Ge wafer
Okuda, Hiroshi, Nakajima, Kazuo, Fujiwara, Kozo, Morishita, Kohei, Ochiai, Shojiro
A point-focusing Johansson monochromator crystal prepared by hot-pressing a Ge single-crystal wafer is demonstrated. By using 333 diffraction, Cu Kα radiation was focused onto a small spot.