Parametric investigation of laser-assisted machining of commercially pure titanium (2008)
Sun, Shoujin, Harris, James G., Brandt, Milan
Turning of commercially pure (CP) titanium was carried out with the assistance of a laser beam. The effects of laser beam arrangement laser power, and cutting speed on the reduction of cutting forces...
Parametric investigation of laser-assisted machining of commercially pure titanium (2008)
Sun, Shoujin, Harris, James G., Brandt, Milan
Turning of commercially pure (CP) titanium was carried out with the assistance of a laser beam. The effects of laser beam arrangement laser power, and cutting speed on the reduction of cutting forces...
Parametric investigation of laser-assisted machining of commercially pure titanium (2008)
Sun, Shoujin, Harris, James G., Brandt, Milan
Turning of commercially pure (CP) titanium was carried out with the assistance of a laser beam. The effects of laser beam arrangement laser power, and cutting speed on the reduction of cutting forces...
Parametric investigation of laser-assisted machining of commercially pure titanium (2008)
Sun, Shoujin, Harris, James G., Brandt, Milan
Turning of commercially pure (CP) titanium was carried out with the assistance of a laser beam. The effects of laser beam arrangement laser power, and cutting speed on the reduction of cutting forces...
Sun, Shoujin, Durandet, Yvonne C., Brandt, Milan
The effective melt pool temperature in pulsed Nd:yttrium-aluminum-garnet laser cladding of Stellite 6 was measured with a two-color pyrometer. The pulse peak temperature (Tp) and durations when the...
Sun, Shoujin, Durandet, Yvonne C., Brandt, Milan
The effective melt pool temperature in pulsed Nd:yttrium-aluminum-garnet laser cladding of Stellite 6 was measured with a two-color pyrometer. The pulse peak temperature (Tp) and durations when the...
Sun, Shoujin, Durandet, Yvonne C., Brandt, Milan
The effective melt pool temperature in pulsed Nd:yttrium-aluminum-garnet laser cladding of Stellite 6 was measured with a two-color pyrometer. The pulse peak temperature (Tp) and durations when the...
Sun, Shoujin, Durandet, Yvonne C., Brandt, Milan
The effective melt pool temperature in pulsed Nd:yttrium-aluminum-garnet laser cladding of Stellite 6 was measured with a two-color pyrometer. The pulse peak temperature (Tp) and durations when the...
The influence of stellite 6 particle size on the inter-track porosity in multi-track cladding (2006)
Sun, Shoujin, Brandt, Milan, Harris, James, Durandet, Yvonne C.
The formation of multi-track laser cladding of stellite 6 with different particle size on mild steel was carried out with different geometry profiles and levels of dilution in the single-track clad...
Effect of increment and single-track geometry on the formation of multitrack laser cladding (2006)
Sun, Shoujin, Brandt, Milan, Harris, James G., Durandet, Yvonne C.
The variation of track geometry during multi-track laser cladding of stellite 6 on mild steel starting with different geometry profiles and levels of dilution in the singletrack clad was examined. In...
The influence of stellite 6 particle size on the inter-track porosity in multi-track cladding (2006)
Sun, Shoujin, Brandt, Milan, Harris, James, Durandet, Yvonne C.
The formation of multi-track laser cladding of stellite 6 with different particle size on mild steel was carried out with different geometry profiles and levels of dilution in the single-track clad...
Effect of increment and single-track geometry on the formation of multitrack laser cladding (2006)
Sun, Shoujin, Brandt, Milan, Harris, James G., Durandet, Yvonne C.
The variation of track geometry during multi-track laser cladding of stellite 6 on mild steel starting with different geometry profiles and levels of dilution in the singletrack clad was examined. In...
The influence of stellite 6 particle size on the inter-track porosity in multi-track cladding (2006)
Sun, Shoujin, Brandt, Milan, Harris, James, Durandet, Yvonne C.
The formation of multi-track laser cladding of stellite 6 with different particle size on mild steel was carried out with different geometry profiles and levels of dilution in the single-track clad...
Effect of increment and single-track geometry on the formation of multitrack laser cladding (2006)
Sun, Shoujin, Brandt, Milan, Harris, James G., Durandet, Yvonne C.
The variation of track geometry during multi-track laser cladding of stellite 6 on mild steel starting with different geometry profiles and levels of dilution in the singletrack clad was examined. In...
The influence of stellite 6 particle size on the inter-track porosity in multi-track cladding (2006)
Sun, Shoujin, Brandt, Milan, Harris, James, Durandet, Yvonne C.
The formation of multi-track laser cladding of stellite 6 with different particle size on mild steel was carried out with different geometry profiles and levels of dilution in the single-track clad...
Effect of increment and single-track geometry on the formation of multitrack laser cladding (2006)
Sun, Shoujin, Brandt, Milan, Harris, James G., Durandet, Yvonne C.
The variation of track geometry during multi-track laser cladding of stellite 6 on mild steel starting with different geometry profiles and levels of dilution in the singletrack clad was examined. In...
In-situ cladding of leading edge of LP turbine blades using fibre delivered diode laser (2005)
Alam, N., Bishop, A., Brandt, Milan, Harris, James G., Sun, Shoujin
No abstract available.
Parametric investigation of pulsed Nd:YAG laser cladding of stellite 6 on stainless steel (2005)
Sun, Shoujin, Durandet, Yvonne C., Brandt, Milan
A systematic research into the cladding of stellite 6 on stainless steel by pulsed Nd:YAG laser has been carried out. The effects of pulse energy, pulse frequency, powder mass flow rate and spot...
Parametric investigation of pulsed Nd:YAG laser cladding of stellite 6 on stainless steel (2005)
Sun, Shoujin, Durandet, Yvonne C., Brandt, Milan
A systematic research into the cladding of stellite 6 on stainless steel by pulsed Nd:YAG laser has been carried out. The effects of pulse energy, pulse frequency, powder mass flow rate and spot...
In-situ cladding of leading edge of LP turbine blades using fibre delivered diode laser (2005)
Alam, N., Bishop, A., Brandt, Milan, Harris, James G., Sun, Shoujin
No abstract available.
Parametric investigation of pulsed Nd:YAG laser cladding of stellite 6 on stainless steel (2005)
Sun, Shoujin, Durandet, Yvonne C., Brandt, Milan
A systematic research into the cladding of stellite 6 on stainless steel by pulsed Nd:YAG laser has been carried out. The effects of pulse energy, pulse frequency, powder mass flow rate and spot...
In-situ cladding of leading edge of LP turbine blades using fibre delivered diode laser (2005)
Alam, N., Bishop, A., Brandt, Milan, Harris, James G., Sun, Shoujin
No abstract available.
Parametric investigation of pulsed Nd:YAG laser cladding of stellite 6 on stainless steel (2005)
Sun, Shoujin, Durandet, Yvonne C., Brandt, Milan
A systematic research into the cladding of stellite 6 on stainless steel by pulsed Nd:YAG laser has been carried out. The effects of pulse energy, pulse frequency, powder mass flow rate and spot...
In-situ cladding of leading edge of LP turbine blades using fibre delivered diode laser (2005)
Alam, N., Bishop, A., Brandt, Milan, Harris, James G., Sun, Shoujin
No abstract available.
Effect of alloying elements on the mechanical properties in the Cu-15% Cr in-situ composites (2004)
Mihara, K, Ma, J., Sakai, Shigeki, Sun, Shoujin, Suzuki, Hirowo G.
The effects of alloying elements on the mechanical properties as well as electrical conductivity in Cu-15%Cr(mass fraction) in-situ composites were systematically studied and high strength and high...
Comparison between continuous wave and pulsed Nd: YAG laser cladding of stellite 6 (2004)
Abstract not available.
Brandt, Milan, Durandet, Yvonne C., Sun, Shoujin
Abstract not available.
Effect of alloying elements on the mechanical properties in the Cu-15% Cr in-situ composites (2004)
Mihara, K, Ma, J., Sakai, Shigeki, Sun, Shoujin, Suzuki, Hirowo G.
The effects of alloying elements on the mechanical properties as well as electrical conductivity in Cu-15%Cr(mass fraction) in-situ composites were systematically studied and high strength and high...
Comparison between continuous wave and pulsed Nd: YAG laser cladding of stellite 6 (2004)
Abstract not available.
Brandt, Milan, Durandet, Yvonne C., Sun, Shoujin
Abstract not available.
Effect of alloying elements on the mechanical properties in the Cu-15% Cr in-situ composites (2004)
Mihara, K, Ma, J., Sakai, Shigeki, Sun, Shoujin, Suzuki, Hirowo G.
The effects of alloying elements on the mechanical properties as well as electrical conductivity in Cu-15%Cr(mass fraction) in-situ composites were systematically studied and high strength and high...
Comparison between continuous wave and pulsed Nd: YAG laser cladding of stellite 6 (2004)
Abstract not available.
Brandt, Milan, Durandet, Yvonne C., Sun, Shoujin
Abstract not available.
Effect of alloying elements on the mechanical properties in the Cu-15% Cr in-situ composites (2004)
Mihara, K, Ma, J., Sakai, Shigeki, Sun, Shoujin, Suzuki, Hirowo G.
The effects of alloying elements on the mechanical properties as well as electrical conductivity in Cu-15%Cr(mass fraction) in-situ composites were systematically studied and high strength and high...
Comparison between continuous wave and pulsed Nd: YAG laser cladding of stellite 6 (2004)
Abstract not available.
Brandt, Milan, Durandet, Yvonne C., Sun, Shoujin
Abstract not available.
Pulsed Nd:YAG laser cladding of stellite 6 on stainless steel (2003)
Brandt, Milan, Durandet, Yvonne C., Sun, Shoujin
Not available.
Pulsed Nd:YAG laser cladding of stellite 6 on stainless steel (2003)
Brandt, Milan, Durandet, Yvonne C., Sun, Shoujin
Not available.
Pulsed Nd:YAG laser cladding of stellite 6 on stainless steel (2003)
Brandt, Milan, Durandet, Yvonne C., Sun, Shoujin
Not available.
Pulsed Nd:YAG laser cladding of stellite 6 on stainless steel (2003)
Brandt, Milan, Durandet, Yvonne C., Sun, Shoujin
Not available.
Properties of thermomechanically processed dual-phase steels containing fibrous martensite (2002)
Manganese partitioning and long fibrous martensite were obtained in several dual-phase steels by annealing, followed by hot rolling in their respective intercritical annealing temperature regions....
Effect of alloying elements on the mechanical properties of Cu-15%Cr in-situ composites (2002)
Ma, J., Mihara, K., Sakai, Shoko, Sun, Shoujin, Suzuki, H.
Abstract not available.
Properties of thermomechanically processed dual-phase steels containing fibrous martensite (2002)
Manganese partitioning and long fibrous martensite were obtained in several dual-phase steels by annealing, followed by hot rolling in their respective intercritical annealing temperature regions....
Effect of alloying elements on the mechanical properties of Cu-15%Cr in-situ composites (2002)
Ma, J., Mihara, K., Sakai, Shoko, Sun, Shoujin, Suzuki, H.
Abstract not available.
Properties of thermomechanically processed dual-phase steels containing fibrous martensite (2002)
Manganese partitioning and long fibrous martensite were obtained in several dual-phase steels by annealing, followed by hot rolling in their respective intercritical annealing temperature regions....
Effect of alloying elements on the mechanical properties of Cu-15%Cr in-situ composites (2002)
Ma, J., Mihara, K., Sakai, Shoko, Sun, Shoujin, Suzuki, H.
Abstract not available.
Properties of thermomechanically processed dual-phase steels containing fibrous martensite (2002)
Manganese partitioning and long fibrous martensite were obtained in several dual-phase steels by annealing, followed by hot rolling in their respective intercritical annealing temperature regions....
Effect of alloying elements on the mechanical properties of Cu-15%Cr in-situ composites (2002)
Ma, J., Mihara, K., Sakai, Shoko, Sun, Shoujin, Suzuki, H.
Abstract not available.
Fabrication and mechanical properties of steel-steel composites (2001)
Metal matrix composites based on a low carbon steel matrix reinforced with high carbon steel wires have been fabricated by a combined cold and hot rolling process. Both continuously and...
Structures and residual stresses of Cr fibers in Cu-15Cr in-situ composites (2001)
The substructures of Cr ribbon/fibers in Cu-15Cr in-situ composites under both the as-drawn and aged conditions have been examined by transmission electron microscopy (TEM) observation. The residual...
Suzuki, Hirowo G., Sakai, Shigeki, Sun, Shoujin
0.5 mass% Si has been added into the Cu–15Cr based alloy for the purpose of strengthening. The microstructure and properties of Cu–15Cr–0.5Si in situ composites have been investigated. Because...
Interfacial properties in steel-steel composite materials (2001)
Steel–steel composites comprising low carbon steel reinforced with eutectoid steel wire have been fabricated by rolling to simulate the character of dual-phase steels. The interfacial strength of...
Suzuki, Hirowo G., Sakai, Shigeki, Sun, Shoujin
Deformation behavior of Cr phase in Cu-15Cr based in situ composites during cold deformation has been examined. Deformation strain partitioning between Cu and Cr phases after cold drawing occurs...
Fabrication and mechanical properties of steel-steel composites (2001)
Metal matrix composites based on a low carbon steel matrix reinforced with high carbon steel wires have been fabricated by a combined cold and hot rolling process. Both continuously and...
Structures and residual stresses of Cr fibers in Cu-15Cr in-situ composites (2001)
The substructures of Cr ribbon/fibers in Cu-15Cr in-situ composites under both the as-drawn and aged conditions have been examined by transmission electron microscopy (TEM) observation. The residual...
Suzuki, Hirowo G., Sakai, Shigeki, Sun, Shoujin
0.5 mass% Si has been added into the Cu–15Cr based alloy for the purpose of strengthening. The microstructure and properties of Cu–15Cr–0.5Si in situ composites have been investigated. Because...
Interfacial properties in steel-steel composite materials (2001)
Steel–steel composites comprising low carbon steel reinforced with eutectoid steel wire have been fabricated by rolling to simulate the character of dual-phase steels. The interfacial strength of...
Suzuki, Hirowo G., Sakai, Shigeki, Sun, Shoujin
Deformation behavior of Cr phase in Cu-15Cr based in situ composites during cold deformation has been examined. Deformation strain partitioning between Cu and Cr phases after cold drawing occurs...
Fabrication and mechanical properties of steel-steel composites (2001)
Metal matrix composites based on a low carbon steel matrix reinforced with high carbon steel wires have been fabricated by a combined cold and hot rolling process. Both continuously and...
Structures and residual stresses of Cr fibers in Cu-15Cr in-situ composites (2001)
The substructures of Cr ribbon/fibers in Cu-15Cr in-situ composites under both the as-drawn and aged conditions have been examined by transmission electron microscopy (TEM) observation. The residual...
Suzuki, Hirowo G., Sakai, Shigeki, Sun, Shoujin
0.5 mass% Si has been added into the Cu–15Cr based alloy for the purpose of strengthening. The microstructure and properties of Cu–15Cr–0.5Si in situ composites have been investigated. Because...
Interfacial properties in steel-steel composite materials (2001)
Steel–steel composites comprising low carbon steel reinforced with eutectoid steel wire have been fabricated by rolling to simulate the character of dual-phase steels. The interfacial strength of...
Suzuki, Hirowo G., Sakai, Shigeki, Sun, Shoujin
Deformation behavior of Cr phase in Cu-15Cr based in situ composites during cold deformation has been examined. Deformation strain partitioning between Cu and Cr phases after cold drawing occurs...
Fabrication and mechanical properties of steel-steel composites (2001)
Metal matrix composites based on a low carbon steel matrix reinforced with high carbon steel wires have been fabricated by a combined cold and hot rolling process. Both continuously and...
Structures and residual stresses of Cr fibers in Cu-15Cr in-situ composites (2001)
The substructures of Cr ribbon/fibers in Cu-15Cr in-situ composites under both the as-drawn and aged conditions have been examined by transmission electron microscopy (TEM) observation. The residual...
Suzuki, Hirowo G., Sakai, Shigeki, Sun, Shoujin
0.5 mass% Si has been added into the Cu–15Cr based alloy for the purpose of strengthening. The microstructure and properties of Cu–15Cr–0.5Si in situ composites have been investigated. Because...
Interfacial properties in steel-steel composite materials (2001)
Steel–steel composites comprising low carbon steel reinforced with eutectoid steel wire have been fabricated by rolling to simulate the character of dual-phase steels. The interfacial strength of...
Suzuki, Hirowo G., Sakai, Shigeki, Sun, Shoujin
Deformation behavior of Cr phase in Cu-15Cr based in situ composites during cold deformation has been examined. Deformation strain partitioning between Cu and Cr phases after cold drawing occurs...