Structure and Properties of Spray Formed Stainless Steel. (1998)
Ucok, Ibrahim, Ando, Teiichi, Grant, Nicholas J.
Spray-deposited 316L stainless steel plates were produced on a water cooled mild steel moving substrate using liquid dynamic compaction; plated which were 4-15 mm thick, 20 cm wide, and of random...
Matsuo, Satoru, Ando, Teiichi, Zody, Michael C., Grant, Nicholas J.
Liquid dynamic compaction (LDC), a rapid solidification spray deposition process, produced grain size refinement in an AISI 1020 steel alloyed with 0.06 wt% Al; the spray deposit showed a fine (10-40...
Duan, Xiaoman, Ando, Teiichi, Grant, Nicholas J.
Aluminum alloy 2024, modified with 2 wt% each of Fe and Ni, was processed by Liquid Dynamic Compaction (LDC); the material displayed high densities (94.9-97.1% of theoretical) and equiaxed grains...
Spray Deposition of AISI 316L Stainless Steel Microalloyed With Aluminum and Nitrogen. (1998)
Ucok, Ibrahim, Ando, Teiichi, Grant, Nicholas J.
This paper reports the spray deposition of AISI 316L stainless steel microalloyed with aluminum and nitrogen to produce fine microstructure. The results indicate that regular liquid dynamic compacted...
Duan, Xiaoman, Ando, Teiichi, Grant, Nicholas J.
Liquid Dynamic Compaction (LDC), a rapid solidification spray deposition process, was utilized to develop and evaluate a high-strength, high-temperature aluminum alloy 2024-2Fe-2Ni; the as-spray...
Development of Ceramic-Coated Roller for Dampening System of Offset Printing Presses. (1998)
Yokoyama, Kazuhiro, Ando, Teiichi, Akiyama, Masami
Chromium-plated rollers have been traditionally used as continuous dampening rollers for offset printing. Since the chromium-plated roller is not very hydrophilic, about 10% isopropyl alcohol (IPA)...
Typescript (photocopy)