European XFEL-LINAC Two-phase He II Flow Simulations. 2007-07-16 - 2007-07-20 (2007)
V. Gubarev, DESY Maschinenphysik, B. Petersen, D. Sellmann, Y. Xiang
Contribution to a conf. proceeding (journal)
Plastic deformation of freestanding thin films: Experiments and modeling (2006)
Nicola, L., Xiang, Y., Vlassak, J.J., Giessen, E. Van Der, Needleman, A.
Experimental measurements and computational results for the evolution of plastic deformation in freestanding thin films are compared. In the experiments, the stress–strain response of two sets of...
This paper presents the formulation and numerical analysis of circular cylindrical shells by the local adaptive differential quadrature method (LaDQM), which employs both localized interpolating...
Blind equalization of nonirreducible systems using the CM criterion (2006)
We address the blind equalization of finite-impulse-response (FIR) and multiple-input multiple-output (MIMO) channel systems excited by constant modulus (CM) signals. It is known that the algorithms...
Blind equalization of nonirreducible systems using the CM criterion (2006)
We address the blind equalization of finite-impulse-response (FIR) and multiple-input multiple-output (MIMO) channel systems excited by constant modulus (CM) signals. It is known that the algorithms...
Blind equalization of nonirreducible systems using the CM criterion (2006)
We address the blind equalization of finite-impulse-response (FIR) and multiple-input multiple-output (MIMO) channel systems excited by constant modulus (CM) signals. It is known that the algorithms...
Grayson, M., Roth, S. F., Xiang, Y., Fischer, F., Schuh, D., Bichler, M.
We demonstrate a contact design that allows four-terminal magnetotransport measurements of cleaved-edge overgrown two-dimensional electron and hole systems. By lithographically patterning and etching...
Free vibration analysis of stepped circular Mindlin plates (2005)
This paper presents the first-known investigation on exact vibration of circular Mindlin plates with multiple step-wise thickness variations. A stepped circular plate is divided into multiple annular...
DSC analysis of free-edged beams by an iteratively matched boundary method (2005)
This communication introduces a novel scheme for the treatment of free edge supports in the analysis of beams by using the discrete singular convolution (DSC) algorithm. Accommodating free edges has...
DSC-Ritz method for the free vibration analysis of Mindlin plates (2005)
This paper introduces a novel method for the free vibration analysis of Mindlin plates. The proposed method takes the advantage of both the local bases of the discrete singular convolution (DSC)...
Buckling of intermediate ring supported cylindrical shells under axial compression (2005)
Xiang, Y., Wang, C. M., Lim, C. W., Kitipornchai, S.
This paper is concerned with the elastic buckling of axially compressed, circular cylindrical shells with intermediate ring supports. The simple Timoshenko thin shell theory and the more...
Buckling of a thin circular plate loaded by in-plane gravity (2005)
Tejeda et al. [I] presented a new exact solution in a recent publication on a plane distortion study of the next generation ionbeam projection lithographic (IPL) masks. An IPL circular mask is...
DSC-Ritz method for the free vibration analysis of Mindlin plates (2005)
This paper introduces a novel method for the free vibration analysis of Mindlin plates. The proposed method takes the advantage of both the local bases of the discrete singular convolution (DSC)...
Buckling of intermediate ring supported cylindrical shells under axial compression (2005)
Xiang, Y., Wang, C. M., Lim, C. W., Kitipornchai, S.
This paper is concerned with the elastic buckling of axially compressed, circular cylindrical shells with intermediate ring supports. The simple Timoshenko thin shell theory and the more...
Buckling of a thin circular plate loaded by in-plane gravity (2005)
Tejeda et al. [I] presented a new exact solution in a recent publication on a plane distortion study of the next generation ionbeam projection lithographic (IPL) masks. An IPL circular mask is...
Plastic buckling of rectangular plates subjected to intermediate and end inplane loads (2004)
This paper is concerned with the plastic buckling of rectangular plates subjected to both intermediate and end uniaxial loads. The plate has two opposite simply supported edges that are parallel to...
Stability criteria for rectangular plates subjected to intermediate and end inplane loads (2004)
This paper is concerned with the elastic buckling of rectangular plates subjected to intermediate and end uniaxial inplane loads, whose direction is parallel to two simply supported edges. The...
Mode shapes and stress-resultants of circular Mindlin plates with free edges (2004)
Xiang, Y., Watanabe, E, Utsunomiya, T.
Presented herein are exact vibration mode shapes and modal stress-resultants for freely vibrating, circular Mindlin plates with free edges. These documented solutions are important in the...
Blind identification of FIR MIMO channels by decorrelating subchannels (2003)
We study blind identification and equalization of finite impulse response (FIR) and multi-input and multi-output (MIMO) channels driven by colored signals. We first show a sufficient condition for an...
Buckling of triangular plates with elastic edge constraints (2002)
This paper presents the first-known investigation on the buckling behavior of triangular plates with both translational and rotational elastic edge constraints. The energy functional of a general...
Discrete singular convolution for the prediction of high frequency vibration of plates (2002)
Theoretical analysis of high frequency vibrations is indispensable in a variety of engineering designs. Much effort has been made on this subject in the past few decades. However, there is no single...
Exact solutions for vibration of multi-span rectangular Mindlin plates (2002)
This paper presents the first-known exact solutions for the vibration of multi-span rectangular Mindlin plates with two opposite edges simply supported. The Levy type solution method and the...
Buckling of rectangular plates with mixed edge supports (2002)
This paper presents a domain decomposition method for buckling analysis of rectangular Kirchhoff plates subjected to uniaxial inplane load and with mixed edge support conditions. A plate is...
Buckling of standing vertical plates under body forces (2002)
This paper is concerned with the elastic buckling problem of vertical plates under body forces/selfweight. The vertical plate is either clamped or simply supported at its bottom edge while its top...
Plate vibration under irregular internal supports (2002)
This paper studies the problem of plate vibration under complex and irregular internal support conditions. Such a problem has its widely spread industrial applications and has not been addressed in...
A novel approach for the analysis of high-frequency vibrations (2002)
Despite much effort in the past few decades, the numerical prediction of high-frequency vibrations remains a challenging task to the engineering and scientific communities due to the numerical...
A non-discrete approach for analysis of plates with multiple subdomains (2002)
This paper presents a non-discrete approach for vibration and buckling analysis of rectangular Kirchhoff plates with mixed edge support conditions. A plate is decomposed into multiple rectangular...
This paper presents a novel computational approach, the discrete singular convolution (DSC) algorithm, for analysing plate structures. The basic philosophy behind the DSC algorithm for the...
Exact buckling and vibration solutions for stepped rectangular plates (2002)
This paper is concerned with the determination of exact buckling loads and vibration frequencies of multi-stepped rectangular plates based on the classical thin (Kirchhoff) plate theory. The plate is...
A non-discrete approach for analysis of plates with multiple subdomains (2002)
This paper presents a non-discrete approach for vibration and buckling analysis of rectangular Kirchhoff plates with mixed edge support conditions. A plate is decomposed into multiple rectangular...
This paper presents a novel computational approach, the discrete singular convolution (DSC) algorithm, for analysing plate structures. The basic philosophy behind the DSC algorithm for the...
Buckling of rectangular plates with internal hinge (2001)
Xiang, Y., Wang, C. M., Wang, C. Y.
This paper is concerned with the elastic buckling of uniaxially/biaxially loaded rectangular plates with an internal hinge and two opposite sides simply supported. The buckling problem is solved...
This paper introduces the discrete singular convolution algorithm for vibration analysis of rectangular plates with mixed boundary conditions. A unified scheme is proposed for the treatment of simply...
Axisymmetric buckling of Reddy circular plates on Pasternak foundation (2001)
Presented herein are the exact axisymmetric buckling solutions of Reddy circular plates on the Pasternak foundation and subjected to a uniform radial load. The boundary conditions of the circular...
Elastic/plastic buckling of thick plates (2001)
This paper is concerned with the elastic/plastic buckling of thick plates of rectangular and circular shapes. For thick plates, the significant effect of transverse shear deformation on the critical...
Evaluation of modal stress resultants in freely vibrating plates (2001)
Xiang, Y., Utsunomiya, T., Watanabe, E.
In the dynamic analysis of a very large floating structure (VLFS), it is crucial that the stress resultants are accurately determined for design purposes. This paper highlights some problems in...
Evaluation of modal stress resultants in freely vibrating plates (2001)
Wang, C.M., Xiang, Y., Utsunomiya, T., Watanabe, E.
In the dynamic analysis of a very large floating structure (VLFS), it is crucial that the stress resultants are accurately determined for design purposes. This paper highlights some problems in...
Altered Rous sarcoma virus Gag polyprotein processing and its effects on particle formation. (1997)
Xiang, Y, Ridky, T W, Krishna, N K, Leis, J
Proteolytic processing of the Rous sarcoma virus (RSV) Gag precursor was altered in vivo through the introduction of amino acid substitutions into either the polyprotein cleavage junctions or the PR...
Fine mapping and characterization of the Rous sarcoma virus Pr76gag late assembly domain. (1996)
Xiang, Y, Cameron, C E, Wills, J W, Leis, J
The p2 region of the Rous sarcoma virus (RSV) Gag polyprotein contains an assembly domain, which is required late in replication for efficient budding of virus-like particles from cells (J. W. Wills,...